Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC100X300S
AirTAC B06-SC100X300S Battery-Optimized Standard Cylinder Specifications
- Model: B06-SC100X300S
- Series: B06-SC (Battery System Special Design)
- Bore size: Ø100mm
- Stroke: 300mm
- Action type: Double-acting
- Material: Aluminum alloy barrel with hard anodized surface
- Cushioning: Adjustable pneumatic cushion (both ends)
- Mounting style: Basic type (Standardized ISO/VDMA mounting interfaces)
- Operating pressure: 0.1–0.9 MPa
- Temperature range: -20℃ to 80℃
- Seal material: Heat-resistant NBR (Nitrile Butadiene Rubber)
- Rod thread: M20×1.5 (External)
- Weight: 5.8 kg ±2% (Without mounting accessories)
- Dimensions:
- Total length: 456mm (Stroke 300 + End caps)
- Body diameter: Ø112mm (Barrel OD)
- Mounting center distance: 160mm (Between front/rear mounting holes)
- Rod end bracket: 60×60mm square flange
- Lubrication: Pre-lubricated (Maintenance-free for 2000km operation)
- Protection rating: IP65 (Dust-tight & water jet resistant)
- Certification: RoHS compliant
Heavy-duty pneumatic cylinder specifically engineered for battery-powered systems, featuring low-friction seals and optimized air consumption. The SC series incorporates a dual-seal piston design with wear-resistant guide rings, ensuring consistent performance in intermittent duty cycles. Includes built-in magnetic sensor slots (compatible with M9/M12 proximity sensors) for position feedback.
- Lithium battery module assembly presses
- AGV (Automated Guided Vehicle) lifting mechanisms
- Solar panel cleaning robot actuators
- Battery swapping station manipulators
- Energy storage system maintenance equipment
Installation protocol:
For optimal performance in battery systems, maintain 0.3-0.6 MPa operating pressure and use 40μm filtered air.
Recommend vertical or horizontal mounting with ≤0.15mm/m alignment tolerance. Cushion adjustment requires 1/8" hex key
(Turn clockwise to increase damping force). Avoid continuous full-stroke operation exceeding 80% duty cycle.
| Property | Property Value |
|---|---|
| sku | B06-SC100X300S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.