Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X100S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC63X100S is a genuine double-acting standard air cylinder with a Ø63mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ63 mm
- Stroke100 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X100S
The B06-SC63X100S is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery-manufacturing lines. The "B06-" prefix designates it as the battery-industry dedicated variant of the standard SC63X100S, meaning it shares the exact same mechanical specifications. It features a 63mm bore and a 100mm stroke, generating a push force of 1559N at 0.5MPa and up to 2805N at 0.9MPa.
This unit includes a built-in magnet (indicated by the "S" suffix) for position sensing via CMSG, DMSG, or EMSG sensors. It uses a PT1/4 port, houses a 20mm piston rod, and has a body length A of 153mm. The adjustable cushions are 28mm long, ensuring smooth deceleration at stroke ends during high-speed cell assembly operations.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X100S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X100S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (approx.) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X100S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X100S Is Used
Cell Stacking
Provides the precise 1559N push force at 0.5MPa needed for aligning and stacking battery cells in module assembly.
Tab Handling
Uses the magnetic piston for exact position tracking when feeding and positioning battery tabs for welding.
Pack Indexing
Drives short-stroke indexing mechanisms to move battery packs along the production line with reliable 28mm cushions.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X100S the Right Cylinder?
Choose this 63mm bore when your battery stacking or handling system requires moderate force (1559N push at 0.5MPa). If your application needs less force, step down to the 50mm bore (982N push at 0.5MPa); for heavier pack manipulation, step up to the 80mm bore (2513N push at 0.5MPa). For direct replacement, match the 63mm bore, 100mm stroke, PT1/4 thread, basic mounting, and the built-in magnet.
Because this model has a 100mm stroke, side-load risks are minimal, but always ensure the load is axially aligned to prevent premature rod-bearing wear. Note that the SC series is a tie-rod cylinder and is shorter than ISO 15552 profiles, so it is not dimensionally interchangeable with them.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X100S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC63X100S, featuring the same 63mm bore, 100mm stroke, and 2805N force at 0.9MPa, but is designated for battery industry applications.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston at stroke ends. For vertical battery handling, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC63X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.