Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X350S
AirTAC B06-SI Battery-Optimized ISO Cylinder B06-SI100X350S Specifications
- Model: B06-SI100X350S
- Type: ISO 15552 compliant double-acting pneumatic cylinder
- Bore size: 100mm (standardized ISO metric series)
- Stroke: 350mm (±1mm tolerance)
- Operating pressure: 0.05–1.2 MPa
- Piston rod thread: M20×1.5 external thread (ISO 13339 compliant)
- Cushioning: Adjustable air cushion at both ends
- Mounting: ISO 15552 mounting interfaces (VDMA 24562)
- Material: Anodized aluminum barrel, hardened steel piston rod
- Seal type: NBR seals standard (FKM available for high-temp variants)
- Temperature range: -20℃ to 80℃ (extended to 120℃ with FKM seals)
- Weight: 5.8kg (dry, without accessories)
- Dimensions:
- Extended length: 629mm (stroke + basic length)
- Retracted length: 279mm
- Body diameter: 125mm (max cross-section)
- Rod end bracket: 160×80mm mounting face
- IP rating: IP65 (standard wiper seal configuration)
- Lubrication: Pre-lubricated (Grease-free operation possible)
High-efficiency industrial cylinder engineered for battery-powered systems requiring ISO standardization. Features low-friction seals (≤0.15 dynamic friction coefficient) and optimized air consumption (25% lower than standard cylinders). The corrosion-resistant anodized surface withstands harsh environments while maintaining 1,500km minimum service life under rated load. Includes magnetic piston for position sensing compatibility.
- AGV (Automated Guided Vehicle) lifting mechanisms
- Mobile battery-powered assembly stations
- Solar tracker positioning systems
- Portable medical equipment actuators
- Electric vehicle battery pack handling
Installation guidelines:
For vertical mounting, use rod-down orientation to prevent particle accumulation.
Maintain 0.5mm minimum clearance between magnetic sensor and cylinder body.
Requires 5μm filtration for optimal seal longevity.
| Property | Property Value |
|---|---|
| sku | B06-SI100X350S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.