Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X600
AirTAC B06-SI100X600 Battery-Optimized ISO Cylinder Specifications
- Full Model: B06-SI100X600-S
- Series: B06-SI (Battery System Special)
- Standard: ISO 15552 compliant
- Bore Size: Ø100mm (±0.5mm tolerance)
- Stroke: 600mm (adjustable cushioning)
- Operating Pressure: 0.05-1.2MPa (low pressure optimized)
- Temperature Range: -20℃ to 80℃ (wider than standard)
- Piston Speed: 50-800mm/s (battery efficiency mode)
- Seal Material: HNBR with PTFE coating
- Lubrication: Pre-lubricated (maintenance-free for 5,000km)
- Mounting: ISO 15552 foot & flange mounts
- Rod End: 1/2"-20UNF female thread
- Weight: 12.8kg (including mounting hardware)
- Dimensions: 848mm(L) × 125mm(W) × 125mm(H)
- Position Sensing: Built-in magnet for sensor attachment
- Protection: IP67 (enhanced dust/water resistance)
High-efficiency pneumatic cylinder specifically engineered for battery-powered systems, featuring 30% reduced friction compared to standard models. The dual-chamber buffer design minimizes energy loss during stroke reversal. Compatible with regenerative air circuits for energy recovery.
- Mobile battery-powered AGV lifting mechanisms
- Solar panel cleaning robot articulation systems
- EV battery pack assembly line automation
- Portable hydraulic replacement systems
- Off-grid material handling equipment
Installation protocol:
Requires horizontal mounting orientation for optimal battery efficiency.
Use copper-free anti-seize compound on piston rod threads.
Minimum 150mm clearance recommended behind rod end for maintenance.
| Property | Property Value |
|---|---|
| sku | B06-SI100X600 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.