Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI40X100S
AirTAC B06-SI40X100S Battery-Optimized ISO Cylinder Specifications
- Model: B06-SI40X100S
- Type: ISO 15552 compliant double-acting cylinder
- Bore size: 40mm (1-9/16")
- Stroke: 100mm (3.94")
- Operating pressure: 0.05–0.8 MPa (7-116 PSI)
- Cushioning: Adjustable rubber buffer (both ends)
- Port size: 1/4 NPT or M12x1.25 optional
- Piston rod thread: M12x1.75
- Temperature range: -20℃ to 80℃
- Material: Aluminum alloy barrel, stainless steel piston rod
- Seal material: NBR (nitrile) with wear-resistant ring
- Weight: 2.3kg (5.07 lbs)
- Dimensions: 200mm(L) × 40mm(W) × 40mm(H)
- Rod end type: Female thread with cushion screw
- Mounting: Basic type (axial mounting holes per ISO 15552)
- Position detection: Prepared for magnetic sensor (slot width 8mm)
Engineered for battery-powered systems requiring ISO-standard pneumatic actuation. Features low-friction seals (≤0.15 dynamic friction coefficient) and optimized air consumption (0.25L/stroke at 0.5MPa). Anodized barrel resists corrosion in humid environments. Compatible with energy recovery systems through its precision cushion adjustment.
- AGV (Automated Guided Vehicle) lifting mechanisms
- Lithium battery module assembly fixtures
- Solar panel cleaning robot actuators
- Electric forklift clamping systems
- Portable medical oxygen concentrators
Installation note:
For battery applications, use with 0.1μm precision filter and apply MIL-PRF-23827 grease.
Maximum side load: 35N at full extension. Cycle rate ≤80% duty cycle in continuous operation.
| Property | Property Value |
|---|---|
| sku | B06-SI40X100S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.