This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X1000S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 1000mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X1000S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke1000 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X1000S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000S
The AirTAC B06-SID100X1000S is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID100X1000S. Because a rod exits both ends on a single piston, both faces use the rod-side area, generating equal push and pull force of 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. It features a 100 mm bore, G1/2 air port, M20x1.5 rod thread, and a 36 mm adjustable air cushion at each end. This legacy SID series is discontinued and is fully replaced by the direct replacement SAID100X1000S, which retains the exact ISO 15552 mounting interface, bore, stroke, and porting.
The SAID replacement introduces an upgraded piston seal with two Y-shaped one-way elements for low start-up pressure and long life, while expanding the family with SAIL air-released locks, SAIF integrated 4M valves, and BSAI clamp-lock variants. A plain cylinder does not hold loads on air loss; the cushion only decelerates near stroke end, so use an external rod lock or pilot-operated check valve for held loads. The -S suffix provides a built-in piston magnet for legacy CS1-B/DS1-B switches.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X1000S |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X1000S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X1000S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000S Is Used
Battery Cell Stacking
Drives precision stacking mechanisms in lithium battery cell production, using the equal both-ways force to press and retract layers without offset.
Module Handling
Transfers battery modules along assembly lines where the double-rod design prevents rotation and maintains strict parallelism during indexing.
Tab Welding Press
Applies consistent clamping pressure for battery tab welding, using the rear rod to mount a sensor cam for precise position verification.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000S with the B06-SAID100X1000S
To replace the discontinued B06-SID100X1000S, specify the direct replacement SAID100X1000S, which matches the 100 mm bore, 1000 mm stroke, G1/2 port, and ISO 15552 mounting footprint without mechanical changes. Because force is equal both ways, you can size directly by the 3681 N @0.5 MPa rating; if upgrading to a neighbouring bore, evaluate the 80 mm (2268 N) or 125 mm (5734 N) options to match your bidirectional load. Choose a double-rod configuration when you need anti-rotation stability, a back rod to carry a sensor cam, or the ability to drive two tools simultaneously. Reuse basic, FA, LB, or TC mounts, and ensure the -S magnet is specified for switch mounting. For this 1000 mm stroke, external guides are mandatory to prevent rod bending and manage side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X1000S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000S FAQ
Yes, the B06-SID100X1000S is discontinued. The direct replacement is the SAID100X1000S. The B06- prefix simply marks it as a battery-manufacturing dedicated variant of the base SID100X1000S, so the SAID replacement matches it exactly on bore, stroke, G1/2 port, and ISO 15552 mounting interface.
As a double-rod cylinder, force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. It uses a G1/2 air port, operates at 30-800 mm/s, and has a 36 mm adjustable cushion at each end.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X1000S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X1000S replacement — usually within 7-8 hours.