This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID80X1000S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID80X1000S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke1000 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X1000S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000S
The AirTAC B06-SID80X1000S is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID80X1000S. Because a rod exits both ends on one piston, both faces use the rod-side area, making push and pull force equal (2268 N at 0.5 MPa). It features a 25 mm piston rod, M20x1.5 rod-end thread, and a G3/8 air port. This SID model is discontinued and end-of-life.
The direct replacement is the SAID80X1000S, matching the ISO 15552 interface, bore, stroke, force, port, and mounting. The SAI family uses an upgraded piston seal with two Y-shaped one-way elements for low start-up pressure and long life. A double-rod design prevents rod-side rotation and lets the back rod carry a sensor cam or drive a second tool. Note that a plain cylinder drifts on air loss; use an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X1000S |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X1000S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X1000S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000S Is Used
Battery Cell Stacking
Equal both-ways force precisely indexes prismatic battery cells during stacking, while the rear rod mounts a sensor cam to confirm stack height.
Module Tab Welding
Drives welding heads on battery module lines; the double-rod anti-rotation keeps the tool plumb for accurate tab joining over the 1000 mm stroke.
Pack Handling Transfer
Shifts battery packs between conveyors where equal push/pull force prevents jerk, and the ISO 15552 interface drops into existing FA/LB mounts.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000S with the B06-SAID80X1000S
To replace the discontinued B06-SID80X1000S, use the SAID80X1000S directly—it is a direct swap retaining the ISO 15552 mounting interface (Basic, FA, LB, TC, FTC, TCM1, TCM2) and G3/8 port. Size both ways by checking equal force: this 80 mm bore delivers 2268 N at 0.5 MPa, sitting between the 63 mm (1402 N) and 100 mm (3681 N) bores. A double rod is right when you need anti-rotation, a back-rod sensor cam, or dual-tool driving. The -S suffix means a magnet is present for legacy CS1-B/DS1-B switches. For the 1000 mm stroke, add external guides to prevent rod bending under side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X1000S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X1000S FAQ
Yes, the B06-SID80X1000S (battery-manufacturing dedicated variant of SID80X1000S) is discontinued. The direct replacement is the SAID80X1000S, sharing the same ISO 15552 interface, bore, stroke, G3/8 port, and mounting. The SAI replacement also adds an upgraded piston seal.
As a double-rod cylinder, force is equal both ways: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. Speed is 30-800 mm/s. The air cushion is 36 mm at each end. Note that air cushions only decelerate; for load holding on air loss, use an external rod lock.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X1000S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X1000S replacement — usually within 7-8 hours.