This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID80X100S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID80X100S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke100 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X100S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100S
The B06-SID80X100S is an AirTAC battery-manufacturing dedicated double-rod ISO 15552 cylinder, mechanically identical to the base SID80X100S. A rod exits both ends on one piston, meaning both faces use the rod-side area and push/pull force is equal. This model is discontinued; the direct replacement is the SAID80X100S. The SAI upgrade uses a two Y-shaped one-way piston seal for low start-up pressure and long life. The B06- prefix solely marks battery line dedication without altering physical specs.
With an 80mm bore, G3/8 port, and M20x1.5 rod thread, it delivers 2268 N @0.5 MPa equal both ways. The back rod can carry a sensor cam, preventing rotation mismatch. It includes a -S magnet for CS1-B/DS1-B switches. Air cushions only decelerate; use SAIL/BSAI or an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X100S |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X100S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X100S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100S Is Used
Cell Stacking Alignment
Applies equal both-ways force for precise electrode stacking in battery cell production, using the twin rods to prevent rotational drift during compression.
Module Transfer Handling
Drives dual pusher arms simultaneously on a battery module assembly line, utilizing the equal push/pull force to maintain synchronous part transfer.
Pack Indexing Mechanism
Indexes battery packs with a rear-mounted sensor cam on the opposing rod, ensuring precise position verification without external brackets.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100S with the B06-SAID80X100S
To replace B06-SID80X100S, use the direct replacement SAID80X100S, reusing the exact ISO 15552 mounting interface (Basic, FA, LB, TC) and G3/8 port. Size both directions by equal force: this 80mm bore yields 2268 N @0.5 MPa; step down to a 63mm bore (1402 N) or up to a 100mm bore (3681 N) if your battery-stacking payload changes. A double rod is right when you need anti-rotation stability or a rear cam for sensors. The -S magnet fits legacy CS1-B/DS1-B switches. For this 100mm stroke side-load is minimal, but for strokes >=300mm ensure guide alignment to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X100S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X100S FAQ
Yes, the B06-SID80X100S is discontinued. The direct replacement is the SAID80X100S. The B06- prefix designates it as a battery-manufacturing dedicated variant; mechanically it is identical to the standard SID80X100S. The SAID replacement shares the same ISO 15552 interface, 80mm bore, 100mm stroke, G3/8 port, and mounting.
Force is equal both ways: 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. It features a 25mm rod, M20x1.5 thread, 36mm adjustable cushion, and operates at 0.15-1.0 MPa with speeds of 30-800 mm/s. It uses a -S magnet for legacy CS1-B/DS1-B switches; cushions only decelerate, so use an external rod lock for load holding.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X100S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X100S replacement — usually within 7-8 hours.