This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X150S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X150S in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X150S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X150S
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150S
The AirTAC B06-SID80X150S is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, yielding equal push and pull force of 2268 N at 0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the base SID80X150S, built for cell and pack assembly. This discontinued model drops directly into existing ISO 15552 mounts with a G3/8 port and M20x1.5 rod thread.
The exact drop-in replacement is the SAID80X150S, which reuses the same interface, 150 mm stroke, and adjustable 36 mm cushions while adding an upgraded two-piece Y-shaped piston seal for lower start-up pressure. Because both faces use the rod-side area, the safe working load is roughly 1361 N (60% of the 0.5 MPa force), translating to a vertical lift capacity of about 116 kg with a 2:1 margin. The -S suffix indicates a built-in piston magnet for legacy CS1-B/DS1-B switches.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X150S |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X150S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X150S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150S Is Used
Battery Cell Stacking
Equal-both-ways force ensures precise, balanced pressure during prismatic cell stacking and alignment in module assembly lines.
Pack Handling Transfer
The double-rod design prevents rotation during lateral battery pack transfer, maintaining exact positioning for robotic tab welding.
Sensor Cam Actuation
The rear protruding rod drives an external sensor cam, confirming clamp position in tight battery-pack formation fixtures.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150S with the B06-SAID80X150S
To replace the discontinued B06-SID80X150S, install the SAID80X150S directly into your existing ISO 15552 FA, LB, or TC mounts; the G3/8 port, M20x1.5 thread, and 150 mm stroke match exactly. Choose a double-rod cylinder when you need equal force both ways, anti-rotation stability, or a back rod to carry a sensor cam. If sizing both ways, verify force against neighbor bores (63 mm yields 1402 N, 100 mm yields 3681 N at 0.5 MPa) to ensure the 2268 N equal-both-ways output fits your process. The -S magnet enables position sensing. For strokes at or above 300 mm, carefully manage side-load alignment to prevent premature seal wear. Note that air cushions only decelerate near stroke end; for load holding on air loss, use an external rod lock or the SAIL/BSAI lock variant.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X150S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X150S FAQ
Yes, the B06-SID80X150S is discontinued. The exact drop-in replacement is the SAID80X150S. The B06- prefix simply designates it as a battery-manufacturing dedicated variant; mechanically, it is identical to the standard SID80X150S. The SAID replacement shares the same ISO 15552 mounting interface, bore, stroke, and G3/8 port, but features an upgraded piston seal.
This double-acting double-rod cylinder provides equal force in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. It never quotes a larger single-rod push value. The air port is G3/8, the rod thread is M20x1.5, and it operates at speeds of 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X150S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X150S replacement — usually within 7-8 hours.