Airtac BSED Clamping Double Acting Cylinder BSED32X1000
The AirTAC BSED Clamping Double Acting Cylinder BSED32X1000 combines a double-rod ISO 15552 cylinder — a Ø12mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 600 N in either direction if air is lost. Ø32mm bore, 1000mm stroke, PT1/8 ports, G1/8 lock-release.
- BoreØ32 mm
- Stroke1000 mm
- Static holding force600 N
- ConfigurationDouble rod + lock
- Cylinder portPT1/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED32X1000
The AirTAC BSED32X1000 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, providing equal drive force of 345 N each way at 0.5 MPa and resisting rotation. The ISO 15552 extruded aluminum barrel has no external tie rods, and this specific 1000 mm stroke is a non-standard, made-to-order length exceeding the 700 mm maximum standard.
The fail-safe collet lock delivers a 600 N static holding force with no live air required. It is a bidirectional static lock, not a dynamic brake. The lock engages only after the rod stops and releases when both piston sides are pressure-balanced, requiring at least 0.5 seconds. A separate G1/8 release port controls the lock, keeping it independent from the PT1/8 cylinder ports and the adjustable air cushions at both ends.
Double Rod + 600 N Rod Lock (Ø32mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED32X1000 holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED32X1000 Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED32X1000 |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø32 mm |
| Stroke | 1000 mm |
| Static holding force | 600 N |
| Cylinder port | PT1/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 700 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M10×1.25 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa (max) | 484 N |
| Max drive (@0.7 MPa) | 49 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 600 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED32X1000
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 32 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED32X1000 Is Used
Overhead Lift Z-Axis
Holds a 600 N vertical load in place during an air loss event while the double-rod maintains equal 345 N lifting and lowering force at 0.5 MPa.
Web Guide Mechanism
Uses the dual exiting rods for anti-rotation stability on a 1000 mm stroke, ensuring the clamping lock halts the tooling precisely mid-travel.
Pallet Stopper Gate
Applies 483 N of both-way drive force at 0.7 MPa to raise and lower a stop gate, relying on the fail-safe collet to secure the 12 mm rod between cycles.
Is the Airtac BSED Clamping Double Acting Cylinder BSED32X1000 the Right Cylinder?
Select this 32 mm bore model when an application requires symmetric both-way force and a 600 N fail-safe hold. If your load exceeds 600 N, step up to the 40 mm bore, which provides 528 N drive force at 0.5 MPa and a 900 N hold. If you need less force, the BSED series starts at 32 mm, so stepping down requires a different cylinder family. At 0.7 MPa, this unit generates 483 N of drive force and 49 kgf maximum drive force.
Because this stroke is 1000 mm, you must account for side-load and deflection on the 12 mm rod; use a guide to prevent binding. This SKU lacks a magnet, so position sensing is unavailable without modification. Always engage the lock only after motion stops, and release it only when cylinder pressures are balanced. Replacement matches require the 32 mm bore, 1000 mm stroke, PT port thread, and a chosen mounting style from Basic, LB, FA, or TC.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 600 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED32X1000 FAQ
The integrated spring-applied collet engages automatically, providing a bidirectional 600 N static holding force to keep the rod at its position. It is a fail-safe lock, not a dynamic brake, so it must only be engaged after the rod stops. To release, apply air to the G1/8 port after balancing both piston sides, allowing at least 0.5 seconds.
The double-rod provides equal force both ways: 345 N at 0.5 MPa, 483 N at 0.7 MPa, with a maximum drive of 49 kgf. The static holding force of the lock is 600 N. Operating pressure is capped at 0.7 MPa, and speed ranges from 30-800 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED32X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.