Airtac BSED Clamping Double Acting Cylinder BSED32X150S
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED32X150S combines a double-rod ISO 15552 cylinder — a Ø12mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 600 N in either direction if air is lost. Ø32mm bore, 150mm stroke, PT1/8 ports, G1/8 lock-release.
- BoreØ32 mm
- Stroke150 mm
- Static holding force600 N
- ConfigurationDouble rod + lock
- Cylinder portPT1/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED32X150S
The AirTAC BSED32X150S is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, providing equal drive force of 345 N each way at 0.5 MPa and a maximum of 483 N at 0.7 MPa. The symmetrical annulus area ensures identical push and pull dynamics, while the rear rod can mount a flag or resist rotation.
This 32mm bore unit delivers a bidirectional static holding force of 600 N with no live air required. A separate G1/8 release port controls the collet lock, which engages fail-safe upon air loss or E-stop. The lock is a static holding device, not a dynamic brake; engage it only after the rod stops and release it when both piston sides are pressure-balanced, allowing at least 0.5 seconds.
Double Rod + 600 N Rod Lock (Ø32mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED32X150S holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED32X150S Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED32X150S |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Static holding force | 600 N |
| Cylinder port | PT1/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 700 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M10×1.25 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa (max) | 484 N |
| Max drive (@0.7 MPa) | 49 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 600 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED32X150S
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED32X150S Is Used
Vertical Lift Jigs
Holds vertical lift jigs securely in place with 600N of static fail-safe force during air loss, while the 345N both-way drive provides balanced up and down motion.
Symmetric Tooling Transfer
Double-rod design allows rear-rod tooling or cam flags to operate synchronously with 483N of equal bidirectional force at 0.7MPa.
Mid-Process Conveyor Stop
A spring-applied collet locks the 12mm rod instantly on E-stop, preventing conveyor drift without relying on live air pressure.
Is the Airtac BSED Clamping Double Acting Cylinder BSED32X150S the Right Cylinder?
Select this model when an application requires both symmetric equal force and fail-safe holding up to 600 N. If your load exceeds 600 N, step up to the 40mm bore, which provides 528 N drive force at 0.5 MPa and 900 N holding force. If you need less holding, the 32mm is the smallest available bore. Operating pressure is capped at 0.7 MPa. For direct replacement, match the 150mm stroke, PT1/8 cylinder port, and mounting style (Basic, LB, FA, or TC). The -S suffix indicates a magnet for CMSE or DMSE sensors. At 150mm stroke, guide the load to prevent side-load wear on the 12mm rod and 27mm cushions.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 600 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED32X150S FAQ
The drive force is equal both ways: 345N at 0.5MPa and 483N at 0.7MPa (max 49kgf). The integrated rod lock provides a separate bidirectional static holding force of 600N with no live air.
The lock is spring-applied and air-released via a G1/8 port. You must engage it only after the rod stops, and release it only when both piston sides are pressure-balanced, allowing at least 0.5 seconds for safe operation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED32X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.