Airtac BSED Clamping Double Acting Cylinder BSED32X225S
The AirTAC BSED Clamping Double Acting Cylinder BSED32X225S combines a double-rod ISO 15552 cylinder — a Ø12mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 600 N in either direction if air is lost. Ø32mm bore, 225mm stroke, PT1/8 ports, G1/8 lock-release.
- BoreØ32 mm
- Stroke225 mm
- Static holding force600 N
- ConfigurationDouble rod + lock
- Cylinder portPT1/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED32X225S
The AirTAC BSED32X225S is a double-acting, double-rod ISO 15552 profile cylinder with an integrated spring-applied, air-released rod lock. A rod exits both ends, providing equal drive force in both directions—about 345 N each way at 0.5 MPa. The bidirectional fail-safe lock delivers a 600 N static holding force with no live air required.
This 32 mm bore unit features a 225 mm stroke and a magnetic piston (-S) for CMSE or DMSE sensors. The lock uses a separate G1/8 release port and engages via collet mechanism. It is not a dynamic brake; engage only after the rod stops and release when pressure-balanced, allowing at least 0.5 seconds.
Double Rod + 600 N Rod Lock (Ø32mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED32X225S holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED32X225S Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED32X225S |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Static holding force | 600 N |
| Cylinder port | PT1/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 700 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M10×1.25 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa (max) | 484 N |
| Max drive (@0.7 MPa) | 49 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 600 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED32X225S
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED32X225S Is Used
Vertical Lift Stops
Holds a 60 kg vertical lift securely in place with 600 N of fail-safe force during an E-stop, while the double-rod provides equal 345 N lifting and lowering force at 0.5 MPa.
Symmetric Transfer Arm
Drives a pick-and-place arm with equal force both ways using the rear rod for a cam flag, engaging the collet lock to freeze the 225 mm stroke mid-cycle.
Mid-Stroke Machining
Secures a 32 mm bore tooling platform at a precise 225 mm extension, absorbing machining loads with zero live air while the G1/8 port releases the collet.
Is the Airtac BSED Clamping Double Acting Cylinder BSED32X225S the Right Cylinder?
Select this model when your application needs both symmetric force and fail-safe holding. The 32 mm bore yields 345 N of drive force at 0.5 MPa and 483 N at 0.7 MPa, with a 600 N static holding force. If your load exceeds 600 N, step up to the 40 mm bore (739 N drive, 900 N hold). If you need less force, the 32 mm is the smallest available. For a 225 mm stroke, use a guide to prevent side-load wear on the seals.
Replacement matches must verify the 32 mm bore, 225 mm stroke, PT1/8 cylinder port, G1/8 release port, and the -S magnet option. Operating pressure is capped at 0.7 MPa. The lock is spring-applied; ensure safety-rated controls for any overhead or man-rated loads.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 600 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED32X225S FAQ
The double-rod drive force is equal both ways: 345 N at 0.5 MPa and 483 N at 0.7 MPa (max 49 kgf). The integrated spring-applied rod lock provides a separate 600 N static holding force with no live air.
The lock is spring-applied and air-released via the G1/8 port. Engage it only after the rod completely stops. To release, ensure both piston sides are pressure-balanced and apply air to the release port, allowing at least 0.5 seconds before moving.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED32X225S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.