Airtac BSED Clamping Double Acting Cylinder BSED32X600S
The AirTAC BSED Clamping Double Acting Cylinder BSED32X600S combines a double-rod ISO 15552 cylinder — a Ø12mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 600 N in either direction if air is lost. Ø32mm bore, 600mm stroke, PT1/8 ports, G1/8 lock-release.
- BoreØ32 mm
- Stroke600 mm
- Static holding force600 N
- ConfigurationDouble rod + lock
- Cylinder portPT1/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED32X600S
The AirTAC BSED32X600S is a double-acting, double-rod ISO 15552 profile cylinder with an integrated spring-applied, air-released rod lock. A rod exits both ends, providing equal force and speed in both directions—about 345 N each way at 0.5 MPa. The rear rod can carry a flag or cam and resists rotation. The extruded aluminum barrel has no external tie rods.
A bidirectional collet clamps the rod to deliver a 600 N static holding force with zero live air. The lock engages only after the rod stops and releases when both piston sides are pressure-balanced (allow at least 0.5 s). The lock uses a separate G1/8 release port, and operating pressure is capped at 0.7 MPa. This 32 mm bore unit features a 12 mm rod, M10x1.25 rod-end thread, 27 mm cushion length, PT1/8 cylinder ports, and a magnet for CMSE/DMSE sensors.
Double Rod + 600 N Rod Lock (Ø32mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED32X600S holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED32X600S Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED32X600S |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Static holding force | 600 N |
| Cylinder port | PT1/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 700 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M10×1.25 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa (max) | 484 N |
| Max drive (@0.7 MPa) | 49 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 600 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED32X600S
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED32X600S Is Used
Vertical Lift Interlock
Holds a 50 kg vertical lift jig securely in place during an E-stop with 600 N of static fail-safe force, while the 345 N both-way drive cycles the tooling up and down.
Pick-and-Place Pause
Locks a 12 mm rod mid-stroke to hold a part securely during a machine fault, using the rear rod end for a position cam without interfering with the front tool.
Diverter Arm Hold
Maintains a conveyor diverter arm position with no live air, preventing drift from vibration while delivering equal 483 N push and pull forces at 0.7 MPa.
Is the Airtac BSED Clamping Double Acting Cylinder BSED32X600S the Right Cylinder?
Select this 32 mm bore model when an application needs symmetric both-way force and a fail-safe hold up to 600 N. If your load requires less holding force, a smaller bore is unavailable, so you must step up to the 40 mm bore (739 N drive at 0.7 MPa, 900 N hold). If you need more drive force but less hold, step down to the 32 mm bore (483 N drive at 0.7 MPa, 600 N hold). Always verify your load is under 600 N. Engage the lock only after the rod stops, and release it only when both sides are pressure-balanced. For this 600 mm stroke, use a guide to prevent side loads and extend rod life. Replacement parts must match the 32 mm bore, 600 mm stroke, PT port, and magnet option.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 600 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED32X600S FAQ
The double-rod drive force is equal both ways: 345 N at 0.5 MPa and 483 N at 0.7 MPa (max 49 kgf). The integrated spring-applied rod lock provides a separate 600 N static holding force with no live air.
The lock is a static hold, not a dynamic brake. Engage it only after the rod stops. To release, apply pressure to the G1/8 release port only after both piston sides are pressure-balanced, allowing at least 0.5 seconds for the collet to disengage.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED32X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.