Airtac BSED Clamping Double Acting Cylinder BSED32X80
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED32X80 combines a double-rod ISO 15552 cylinder — a Ø12mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 600 N in either direction if air is lost. Ø32mm bore, 80mm stroke, PT1/8 ports, G1/8 lock-release.
- BoreØ32 mm
- Stroke80 mm
- Static holding force600 N
- ConfigurationDouble rod + lock
- Cylinder portPT1/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED32X80
The AirTAC BSED32X80 is a double-acting, double-rod ISO 15552 profile cylinder with an integrated spring-applied, air-released rod lock. A rod exits both ends, delivering equal force and speed in both directions—about 345 N each way at 0.5 MPa. The fail-safe collet lock provides 600 N of static holding force without requiring live air.
This unit features a 32 mm bore, 80 mm stroke, PT1/8 cylinder port, and a separate G1/8 lock-release port. It includes adjustable air cushions at both ends. This specific SKU lacks a magnet, so it does not support CMSE or DMSE position sensors.
Double Rod + 600 N Rod Lock (Ø32mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED32X80 holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED32X80 Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED32X80 |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Static holding force | 600 N |
| Cylinder port | PT1/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 700 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M10×1.25 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa (max) | 484 N |
| Max drive (@0.7 MPa) | 49 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 600 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED32X80
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED32X80 Is Used
Mid-Stroke Tooling Transfer
Uses the 345 N equal both-way drive to push and pull a small fixture between stations, while the 600 N lock holds the tooling firmly during brief process pauses.
Light Vertical Lift Pause
Lifts a 30 kg load equally in both directions; the spring-applied collet clamps the rod to prevent a drop if air pressure drops below 0.15 MPa.
Symmetric Stopper Gate
Extends a rear-rod flag for cam tracking while providing identical 483 N drive force in both directions to operate a light pneumatic gate.
Is the Airtac BSED Clamping Double Acting Cylinder BSED32X80 the Right Cylinder?
Choose this 32 mm bore model when you need symmetric both-way drive and a 600 N static hold. If your load exceeds 600 N, step up to the 40 mm bore, which provides 528 N drive force at 0.5 MPa and a 900 N hold. If your load is lighter, the 32 mm is the smallest available bore. Engage the lock only after the rod stops, and release it only when both piston sides are pressure-balanced, allowing at least 0.5 s. For replacements, match the 80 mm stroke, PT1/8 port, and mounting choice (Basic, LB, FA, or TC).
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 600 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED32X80 FAQ
The integrated spring-applied collet engages immediately, providing a 600 N static holding force to keep the rod at its position. It is a fail-safe lock, not a dynamic brake, so it must only engage after the rod stops.
The double-rod design provides equal drive force both ways: 345 N at 0.5 MPa and 483 N at 0.7 MPa (max 49 kgf). The static holding force of the lock is 600 N. Operating pressure is capped at 0.7 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED32X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.