Airtac BSED Clamping Double Acting Cylinder BSED32X800
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED32X800 combines a double-rod ISO 15552 cylinder — a Ø12mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 600 N in either direction if air is lost. Ø32mm bore, 800mm stroke, PT1/8 ports, G1/8 lock-release.
- BoreØ32 mm
- Stroke800 mm
- Static holding force600 N
- ConfigurationDouble rod + lock
- Cylinder portPT1/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED32X800
The AirTAC BSED32X800 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. Because it is a double-rod design, a rod exits both ends, delivering equal force in both directions—about 345 N each way at 0.5 MPa. The rear rod can mount a flag or cam while resisting rotation.
This unit provides a 600 N static holding force with no live air. If pressure drops or an E-stop trips, the collet clamps the rod to hold position. Note that this 800 mm stroke exceeds the 700 mm standard maximum, making it a non-standard, made-to-order item. The cylinder uses a PT1/8 port, a separate G1/8 release port, and lacks a magnet for position sensors.
Double Rod + 600 N Rod Lock (Ø32mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED32X800 holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED32X800 Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED32X800 |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Static holding force | 600 N |
| Cylinder port | PT1/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 700 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M10×1.25 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa (max) | 484 N |
| Max drive (@0.7 MPa) | 49 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 600 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED32X800
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED32X800 Is Used
Long-Stroke Transfer Stops
Halts a 483 N push on an 800 mm stroke transfer line. The 600 N fail-safe lock holds the load securely during air loss, while the double rod prevents rotation.
Elevating Platform Pins
Raises and lowers light jigs with equal 345 N force both ways. The spring-applied collet engages to hold the platform safely in position when air is removed.
Symmetric Shuttle Diverters
Drives a diverter arm equally in both directions over 800 mm. The rear rod mounts a cam for limit switches, and the 600 N lock holds the arm mid-stroke.
Is the Airtac BSED Clamping Double Acting Cylinder BSED32X800 the Right Cylinder?
Select this 32 mm bore when you need symmetric 345 N drive force at 0.5 MPa alongside a 600 N fail-safe hold. If you need less force, no smaller BSED bore exists. If you need more, step up to the 40 mm bore, which provides 528 N drive force at 0.5 MPa and a 900 N holding force. Always ensure your load is under 600 N when held.
Engage the lock only after the rod stops, and release it only when both piston sides are pressure-balanced, allowing at least 0.5 s. Because this is an 800 mm stroke, use a guide to prevent excessive side-loading on the seals. For a direct replacement, match the 32 mm bore, 800 mm stroke, PT thread, and Basic/LB/FA/TC mounting.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 600 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED32X800 FAQ
The integrated rod lock is spring-applied and air-released. If air pressure drops below 0.15 MPa or an E-stop trips, the collet clamps the rod, providing a 600 N static holding force to keep the load in position without live air.
The BSED32X800 delivers equal both-way drive force of 345 N at 0.5 MPa and 483 N at 0.7 MPa (max 49 kgf). The static holding force is 600 N. It operates at 30-800 mm/s, uses a PT1/8 cylinder port, and has no magnet for sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED32X800
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.