Airtac BSED Clamping Double Acting Cylinder BSED63X100
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED63X100 combines a double-rod ISO 15552 cylinder — a Ø20mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 2200 N in either direction if air is lost. Ø63mm bore, 100mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ63 mm
- Stroke100 mm
- Static holding force2200 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED63X100
The AirTAC BSED63X100 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, delivering equal drive force of 1402 N each way at 0.5 MPa and 1962 N at 0.7 MPa. The collet mechanism provides a bidirectional 2200 N static holding force, locking the rod safely in place if air pressure is lost or an E-stop is triggered.
This 63 mm bore unit uses a PT3/8 cylinder port alongside a separate G1/8 lock-release port, operating at 0.15-0.7 MPa with a 36 mm cushion length. The rear rod extension is ideal for mounting tooling or flags while resisting rotation. This specific SKU lacks a magnet, meaning CMSE or DMSE position sensors cannot be fitted without a model change.
Double Rod + 2200 N Rod Lock (Ø63mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED63X100 holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED63X100 Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED63X100 |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M16×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa (max) | 1962 N |
| Max drive (@0.7 MPa) | 200 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 2200 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED63X100
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED63X100 Is Used
Vertical Lift Jigs
Holds elevated machining jigs securely with 2200 N of fail-safe force during air loss, while the double-rod design provides equal 1962 N lifting and lowering force.
Indexing Assembly Stations
Uses the rear rod for anti-rotation cam mounting, ensuring precise part indexing and clamping without positional drift when E-stops activate.
Pallet Stop Gates
Controls heavy pallet flow with symmetric push/pull action, engaging the collet lock to hold the 1402 N drive load firmly in place during transfers.
Is the Airtac BSED Clamping Double Acting Cylinder BSED63X100 the Right Cylinder?
Select this 100 mm stroke cylinder when your application demands symmetric push/pull force alongside fail-safe holding. Verify your static load does not exceed the 2200 N holding capacity. If you need less force, the 50 mm bore provides 825 N at 0.5 MPa and 1400 N holding; for heavier loads, step up to the 80 mm bore offering 2268 N at 0.5 MPa and 3600 N holding. Remember this is a static lock, not a dynamic brake: engage only after the rod stops, and release only when both piston sides are pressure-balanced, allowing at least 0.5 s. For replacing this unit, match the 63 mm bore, 100 mm stroke, PT3/8 port, and mounting choice (Basic, LB, FA, or TC).
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 2200 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED63X100 FAQ
The spring-applied collet immediately clamps the rod, providing a 2200 N static holding force to prevent movement. It is a fail-safe lock, not a dynamic brake, so it only engages after the rod has stopped. To release, apply pressure to the G1/8 port after balancing both piston sides, allowing at least 0.5 seconds.
The double-rod design provides equal force in both directions: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa, with a maximum drive capacity of 200 kgf. The integrated fail-safe lock provides a separate 2200 N static holding force with no live air required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED63X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.