Airtac BSED Clamping Double Acting Cylinder BSED63X1000
The AirTAC BSED Clamping Double Acting Cylinder BSED63X1000 combines a double-rod ISO 15552 cylinder — a Ø20mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 2200 N in either direction if air is lost. Ø63mm bore, 1000mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ63 mm
- Stroke1000 mm
- Static holding force2200 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED63X1000
The AirTAC BSED63X1000 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, yielding equal force and speed in both directions—about 1402 N each way at 0.5 MPa. The extruded aluminum barrel contains no external tie rods, and the rear rod can mount a flag or resist rotational torque.
This unit provides a bidirectional fail-safe holding force of 2200 N with no live air. The lock is a static collet mechanism, not a dynamic brake; it engages only after the rod stops and releases when piston sides are pressure-balanced. Operating pressure is capped at 0.7 MPa, and the lock uses a separate G1/8 release port. This SKU lacks a magnet, so CMSE or DMSE position sensors cannot be used.
Double Rod + 2200 N Rod Lock (Ø63mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED63X1000 holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED63X1000 Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED63X1000 |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M16×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa (max) | 1962 N |
| Max drive (@0.7 MPa) | 200 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 2200 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED63X1000
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 63 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED63X1000 Is Used
Overhead Lift Stations
Holds a 2200 N vertical load securely if air pressure drops, while the equal 1962 N both-way drive raises and lowers the platform smoothly.
Long-Stroke Pallet Stops
Uses the 1000 mm stroke to index pallets on a line, relying on the rear rod for an anti-rotation cam and the lock to arrest position.
Multi-Stage Assembly Presses
Applies symmetric clamping force from both rod ends during part joining, engaging the collet lock only after the press motion halts.
Is the Airtac BSED Clamping Double Acting Cylinder BSED63X1000 the Right Cylinder?
Select this 63 mm bore when an application needs symmetric 1962 N drive force at 0.7 MPa alongside a 2200 N fail-safe hold. If your load requires less force, the 50 mm bore delivers 1154 N drive and 1400 N holding force. For heavier demands, step up to the 80 mm bore, which provides 3175 N drive and 3600 N holding force. Always verify the static load does not exceed the 2200 N limit.
Because the stroke is 1000 mm, carefully manage side loads using external guides to prevent rod sag and bearing wear. To release the clamp safely, balance pressure on both piston sides and allow at least 0.5 seconds before moving. When ordering a replacement, match the 1000 mm stroke, PT3/8 cylinder port, M16x1.5 rod thread, and the chosen Basic, LB, FA, or TC mounting option.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 2200 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED63X1000 FAQ
The double-rod drive force is equal in both directions: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa, with a maximum drive of 200 kgf. The integrated static rod lock provides a bidirectional holding force of 2200 N with no live air.
The spring-applied collet engages only after the rod stops. To release it safely, apply pressure to balance both piston sides via the G1/8 release port, wait at least 0.5 seconds, and then command cylinder movement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED63X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.