Airtac BSED Clamping Double Acting Cylinder BSED63X100S
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED63X100S combines a double-rod ISO 15552 cylinder — a Ø20mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 2200 N in either direction if air is lost. Ø63mm bore, 100mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ63 mm
- Stroke100 mm
- Static holding force2200 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED63X100S
The AirTAC BSED63X100S is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, providing equal drive force of 1402 N each way at 0.5 MPa and 1962 N at 0.7 MPa. The rear rod is ideal for mounting tooling or flags and helps resist rotation.
This fail-safe collet lock delivers a 2200 N static holding force with no live air required. It engages only after the rod stops and releases when piston sides are pressure-balanced, taking at least 0.5 seconds. The lock uses a separate G1/8 release port, while the cylinder ports are PT3/8. Equipped with a magnet, it supports CMSE reed and DMSE electronic sensors.
Double Rod + 2200 N Rod Lock (Ø63mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED63X100S holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED63X100S Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED63X100S |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M16×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa (max) | 1962 N |
| Max drive (@0.7 MPa) | 200 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 2200 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED63X100S
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED63X100S Is Used
Vertical Lift Jigs
Holds elevated machining jigs securely in place with 2200 N of static fail-safe force during air loss, while the double-rod design ensures equal 1962 N lifting and lowering forces.
Pallet Stopper Arms
Stops heavy pallets on conveyors using the equal both-way drive, then locks the rod instantly to prevent bounce-back, utilizing the rear rod for a cam flag.
Clamp Transfer Units
Transfers clamping arms in both directions with identical 1402 N force at 0.5 MPa, engaging the spring-applied collet to hold position securely during E-stop events.
Is the Airtac BSED Clamping Double Acting Cylinder BSED63X100S the Right Cylinder?
Select this 63mm bore model when your application demands both symmetric force and fail-safe holding up to 2200 N. If your load to hold is under 1400 N, step down to the 50mm bore (825 N drive @0.5 MPa, 1400 N hold). If you need more drive or holding capacity, step up to the 80mm bore (2268 N drive @0.5 MPa, 3600 N hold). Always engage the lock only after the rod stops and release it when both sides are pressure-balanced.
When replacing a unit, match the 100mm stroke, PT3/8 port, and mounting choice (Basic, LB, FA, or TC). The integrated -S magnet enables position sensing. Because the stroke is 100mm, keep side-loads minimized by using external guides to prevent binding.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 2200 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED63X100S FAQ
The drive force is equal in both directions: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa (max 200 kgf). The integrated fail-safe rod lock provides a separate bidirectional static holding force of 2200 N with no live air.
If air is lost or an E-stop trips, the spring-applied collet clamps the rod instantly, holding the load up to 2200 N. It is not a dynamic brake; engage it only after the rod stops. To release, apply air to the G1/8 release port after balancing pressure on both piston sides, allowing at least 0.5 seconds.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED63X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.