Airtac BSED Clamping Double Acting Cylinder BSED63X175
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED63X175 combines a double-rod ISO 15552 cylinder — a Ø20mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 2200 N in either direction if air is lost. Ø63mm bore, 175mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ63 mm
- Stroke175 mm
- Static holding force2200 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED63X175
The AirTAC BSED63X175 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, providing equal drive force in each direction—delivering 1402 N at 0.5 MPa and 1962 N at 0.7 MPa (maximum 200 kgf). The integrated collet lock provides a bidirectional static holding force of 2200 N without requiring live air.
This unit utilizes a separate G1/8 lock-release port to disengage the collet, operating distinctly from the adjustable air cushions at both ends. The extruded aluminum barrel conforms to ISO 15552 dimensional interchangeability without external tie rods. This specific SKU lacks a magnet, meaning it is not compatible with CMSE or DMSE position sensors.
Double Rod + 2200 N Rod Lock (Ø63mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED63X175 holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED63X175 Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED63X175 |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M16×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa (max) | 1962 N |
| Max drive (@0.7 MPa) | 200 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 2200 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED63X175
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED63X175 Is Used
Mid-Range Machining Jig
Clamps a workpiece with 1962 N of equal both-way force, while the 2200 N rod lock holds the fixture rigidly in place during cutting operations if air pressure drops.
Z-Axis Lift Station
Raises and lowers a 150 kg platform with symmetric speed, relying on the fail-safe collet to prevent uncontrolled descent when the machine enters an E-stop state.
Pallet Diverter Arm
Uses the rear rod end to mount a cam flag for position signaling, while the front rod pushes pallets with 1402 N at 0.5 MPa and locks securely during indexing delays.
Is the Airtac BSED Clamping Double Acting Cylinder BSED63X175 the Right Cylinder?
Select this 63 mm bore model when your application requires symmetric both-way force and a fail-safe hold up to 2200 N. If your load demands less force, the adjacent 50 mm bore offers 825 N at 0.5 MPa and a 1400 N hold; if you need more power, the 80 mm bore provides 2268 N at 0.5 MPa and a 3600 N hold. Operating pressure is capped at 0.7 MPa. To release the lock safely, ensure both piston sides are pressure-balanced and allow at least 0.5 seconds before moving. When ordering a replacement, verify the 175 mm stroke, PT3/8 cylinder port, and mounting style (Basic, LB, FA, or TC).
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 2200 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED63X175 FAQ
The drive force is equal both ways: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa (maximum 200 kgf). The static fail-safe holding force of the integrated rod lock is 2200 N. Remember that the drive force moves the load, while the holding force keeps it stationary with no live air.
The lock is a spring-applied, air-released collet, not a dynamic brake. You must engage it only after the rod completely stops. To release it, apply pressure to the separate G1/8 release port, ensure both piston sides are pressure-balanced, and wait at least 0.5 seconds before commanding motion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED63X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.