Airtac BSED Clamping Double Acting Cylinder BSED63X200
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED63X200 combines a double-rod ISO 15552 cylinder — a Ø20mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 2200 N in either direction if air is lost. Ø63mm bore, 200mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ63 mm
- Stroke200 mm
- Static holding force2200 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED63X200
The AirTAC BSED63X200 is a double-acting, double-rod ISO 15552 profile cylinder with an integrated spring-applied, air-released rod lock. A rod exits both ends, delivering equal drive force of 1402 N each way at 0.5 MPa. The rear rod is ideal for mounting flags or anti-rotation tooling.
A separate G1/8 release port controls the collet mechanism, which provides a bidirectional static holding force of 2200 N with zero live air. This fail-safe lock engages only after the rod stops and requires pressure balance for safe release.
Double Rod + 2200 N Rod Lock (Ø63mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED63X200 holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED63X200 Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED63X200 |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M16×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa (max) | 1962 N |
| Max drive (@0.7 MPa) | 200 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 2200 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED63X200
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED63X200 Is Used
Overhead Lift Stops
Holds vertical loads mid-stroke at 2200 N when shop air drops, preventing sudden crashes during material elevation changes.
Symmetric Transfer Arms
Uses the equal 1962 N both-way force to shuttle parts evenly, while the lock freezes the arm precisely during loading.
Mid-Stroke Machining
Clamps the rod at 2200 N to resist machining vibration, ensuring the tooling stays rigidly fixed without live air.
Is the Airtac BSED Clamping Double Acting Cylinder BSED63X200 the Right Cylinder?
Step down to the 50mm bore for 825 N drive force at 0.5 MPa and 1400 N holding force, or step up to the 80mm bore for 2268 N drive force and 3600 N holding force. Verify your load to hold is under 2200 N. Engage the lock only when the rod is stopped, and allow at least 0.5 seconds for the collet to clamp.
This 200mm stroke model uses a PT3/8 cylinder port and a 36mm cushion length. It ships without a magnet, so position sensing is unavailable on this SKU. Match your replacement by bore, stroke, port, and mounting.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 2200 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED63X200 FAQ
The spring-applied collet clamp engages automatically, providing a bidirectional static holding force of 2200 N to keep the rod at its last position. It is a fail-safe hold, not a dynamic brake, so it must only engage after the rod stops moving.
The double-rod drive force is equal both ways at 1402 N at 0.5 MPa and 1962 N at 0.7 MPa, with a maximum drive of 200 kgf. The integrated rod lock provides a separate 2200 N static holding force with no live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED63X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.