Airtac BSED Clamping Double Acting Cylinder BSED63X350S
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED63X350S combines a double-rod ISO 15552 cylinder — a Ø20mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 2200 N in either direction if air is lost. Ø63mm bore, 350mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ63 mm
- Stroke350 mm
- Static holding force2200 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED63X350S
The AirTAC BSED63X350S is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, delivering equal force in both directions—about 1402 N each way at 0.5 MPa. The rear rod is ideal for mounting flags, cams, or secondary tooling while resisting rotational torque.
This fail-safe collet mechanism provides a 2200 N static holding force with no live air required. If pressure drops or an E-stop trips, the rod is securely clamped at position. It features a PT3/8 cylinder port, a separate G1/8 lock-release port, and a -S magnet for CMSE or DMSE sensors.
Double Rod + 2200 N Rod Lock (Ø63mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED63X350S holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED63X350S Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED63X350S |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 350 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M16×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa (max) | 1962 N |
| Max drive (@0.7 MPa) | 200 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 2200 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED63X350S
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 63 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED63X350S Is Used
Overhead Lift Stations
Holds a 2200 N vertical load safely during air loss. The 1402 N both-way drive raises and lowers the platform with equal speed and force.
Dual-Tool Machining Jigs
The double-rod design supports tooling on both ends for alternating operations. The fail-safe collet locks the 350 mm stroke firmly during part changes.
Pallet Diverters
Uses equal push and pull force to index pallets left and right. The rod lock clamps the diverter arm securely between cycles to prevent drift.
Is the Airtac BSED Clamping Double Acting Cylinder BSED63X350S the Right Cylinder?
Select this 63 mm bore when an application requires both symmetric drive force and mid-stroke holding. Verify your static load is 2200 N or less. If you need less force, the 50 mm bore offers 825 N at 0.5 MPa and 1400 N holding. If you need more, step up to the 80 mm bore for 2268 N at 0.5 MPa and 3600 N holding. At 350 mm stroke, use external guide rails to prevent side-load wear on the seals and rod lock collet.
Always engage the lock only after the rod completely stops, and release it only when both piston sides are pressure-balanced, allowing at least 0.5 s for the collet to retract. To match this unit exactly, specify the 63 mm bore, 350 mm stroke, PT3/8 threads, and the -S magnet option.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 2200 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED63X350S FAQ
The drive force is equal in both directions: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa, with a maximum drive force of 200 kgf. The separate static holding force of the spring-applied rod lock is 2200 N, which engages without live air.
The lock is a spring-applied, air-released collet, not a dynamic brake. You must engage it only after the rod stops moving. To release, apply air to the G1/8 release port only after both piston sides are pressure-balanced, allowing at least 0.5 seconds for the collet to fully retract before cycling.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED63X350S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.