Airtac BSED Clamping Double Acting Cylinder BSED63X900
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED63X900 combines a double-rod ISO 15552 cylinder — a Ø20mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 2200 N in either direction if air is lost. Ø63mm bore, 900mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ63 mm
- Stroke900 mm
- Static holding force2200 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED63X900
The AirTAC BSED63X900 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, delivering equal drive force of 1402 N each way at 0.5 MPa. The extruded aluminum barrel has no external tie rods, and the rear rod can mount a flag or resist rotation.
The fail-safe collet lock provides a 2200 N static holding force without live air. It engages bidirectionally when pressure drops or an E-stop trips. A separate G1/8 release port controls the lock, and the lock is a static hold, not a dynamic brake. This SKU has no magnet, so position sensors are not supported.
Double Rod + 2200 N Rod Lock (Ø63mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED63X900 holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED63X900 Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED63X900 |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 900 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M16×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa (max) | 1962 N |
| Max drive (@0.7 MPa) | 200 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 2200 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED63X900
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 63 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED63X900 Is Used
Overhead Z-Axis Lift
Holds a vertical lifting platform securely mid-stroke with 2200 N of static force if air drops, while the double-rod provides equal 1402 N lift and lowering force at 0.5 MPa.
Pallet Stop Gate
A rod extending from both ends actuates a heavy stop gate and a rear cam flag simultaneously. The lock holds the 900mm stroke firmly against flowing pallet impacts.
Long-Stroke Machining Clamp
Traverses a 900mm distance to clamp large parts. The fail-safe collet maintains position during machining cycles, resisting 1962 N of push force at 0.7 MPa.
Is the Airtac BSED Clamping Double Acting Cylinder BSED63X900 the Right Cylinder?
Select this 63mm bore when your application needs symmetric force and failsafe holding up to 2200 N. If your load requires less force, step down to the 50mm bore, which provides 825 N at 0.5 MPa and a 1400 N hold. If you need more drive or hold, step up to the 80mm bore, offering 2268 N at 0.5 MPa and a 3600 N hold. Operating pressure is capped at 0.7 MPa.
Ensure the load to hold is under 2200 N. Engage the lock only after the rod stops, and release it only when both piston sides are pressure-balanced, allowing at least 0.5 seconds. Because the 900mm stroke is long, use external guide rails to prevent side-load damage. This cylinder uses a PT3/8 port, a 20mm rod with an M16x1.5 thread, and a 36mm cushion length.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 2200 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED63X900 FAQ
The spring-applied collet engages instantly, providing a 2200 N bidirectional static holding force to keep the rod at its position. It is a fail-safe static hold, not a dynamic brake, so it must only engage after the rod stops.
The drive force is equal both ways: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa, with a max drive of 200 kgf. The static holding force is 2200 N. Speed is 30-800 mm/s. To release the lock safely, balance pressure on both piston sides via the G1/8 port and wait at least 0.5 seconds.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED63X900
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.