Airtac BSED Clamping Double Acting Cylinder BSED80X200
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED80X200 combines a double-rod ISO 15552 cylinder — a Ø25mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 3600 N in either direction if air is lost. Ø80mm bore, 200mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ80 mm
- Stroke200 mm
- Static holding force3600 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED80X200
The AirTAC BSED80X200 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, delivering equal drive force of 2268 N each way at 0.5 MPa and 3175 N at 0.7 MPa. The collet lock provides a bidirectional static holding force of 3600 N with zero live air required.
This 80 mm bore unit uses a PT3/8 cylinder port and a separate G1/8 release port. The extruded aluminum barrel omits external tie rods for a clean ISO 15552 mounting interface. This SKU ships without a magnet, meaning no CMSE or DMSE position sensors can be fitted. The lock is a static holding device, not a dynamic brake, and must only engage after the rod stops moving.
Double Rod + 3600 N Rod Lock (Ø80mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED80X200 holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED80X200 Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED80X200 |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Static holding force | 3600 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M20×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa (max) | 3175 N |
| Max drive (@0.7 MPa) | 324 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 3600 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED80X200
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED80X200 Is Used
Vertical Lift Station
Holds a 3600 N vertical load securely in place during an E-stop or pressure drop, while the 3175 N equal both-way drive force raises and lowers the platform smoothly.
Servo Press Feed
Uses the rear rod for an anti-rotation flag or tooling mount. The collet clamps the rod instantly when motion stops, preventing drift during the pressing cycle.
Pallet Stopper
Extends a double-rod stopper blade across a conveyor line. The spring-applied lock maintains the barrier position without consuming live air between cycles.
Is the Airtac BSED Clamping Double Acting Cylinder BSED80X200 the Right Cylinder?
Select this 80 mm bore model when your application requires symmetric both-way force and a 3600 N fail-safe hold. If your load is lighter, the 63 mm bore offers 1402 N at 0.5 MPa and a 2200 N hold. For heavier loads, the 100 mm bore provides 3681 N at 0.5 MPa and a 5500 N hold. Always verify your load stays within the 3600 N static limit.
Operating pressure is capped at 0.7 MPa. To replace or match this unit, specify the 80 mm bore, 200 mm stroke, PT3/8 port thread, and your chosen mounting from Basic, LB, FA, or TC. Engage the lock only after the rod stops, and release it only when both piston sides are pressure-balanced, allowing at least 0.5 seconds.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 3600 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED80X200 FAQ
If air is lost, the spring-applied collet clamps the rod instantly, providing a bidirectional static holding force of 3600 N. It is a fail-safe lock, not a dynamic brake, so it must engage only after the rod stops moving.
The double-rod drive force is equal both ways: 2268 N at 0.5 MPa and 3175 N at 0.7 MPa, with a maximum drive of 324 kgf. The separate static holding force of the rod lock is 3600 N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED80X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.