Airtac DPC Compact Non-display Pressure Switch DPCP-0102008
DPC Compact Pressure Switch (No Display)
1. Wide measurement range; Quick and easy installation;2. Configurable two-wire or three-wire NPN/PNP output options;
3. One-touch auto-calibration; NO/NC contact switching capability;
4. Dual setting modes (Quick/Median modes) for flexible adaptation.
Category: Pressure Switches | Brand: AIRTAC | Series: DPC
AirTAC DPC Series Compact Pressure Switch DPCP-0102008 Technical Details
- Model: DPCP-0102008
- Type: Non-display pressure switch (mechanical diaphragm type)
- Pressure range: 0.05-0.9 MPa (settable), 1.5 MPa max withstand pressure
- Electrical rating: DC12-24V ±10%, ≤200mA load current
- Output type: NPN/PNP selectable (2-wire)
- Port size: G1/8 (BSPP thread)
- Housing material: Brass CW617N with chrome plating
- Seal material: FKM (Fluorocarbon Rubber)
- Accuracy: ±1% F.S. (repeatability)
- Response time: <2ms (pressure change detection)
- Protection rating: IP65 (dust-tight & water jet resistant)
- Temperature range: -10℃ to 60℃ (operating), -30℃ to 80℃ (storage)
- Weight: 85g ±3g (including cable)
- Dimensions: 40mm(L) × 25mm(W) × 20mm(H) (body only)
- Cable: 2m PVC shielded cable (3-core 0.3mm²)
- Hysteresis: ≤5% of set value
Ultra-compact electromechanical pressure switch featuring instant response and dual NPN/PNP output configuration. The brass construction with chrome plating ensures corrosion resistance in humid environments. Precision diaphragm mechanism enables stable detection of minute pressure fluctuations. Includes reverse polarity protection and surge suppression.
- Miniature pneumatic cylinder end-position detection
- Compressed air system pressure monitoring
- Medical oxygen concentrator safety cut-off
- Beverage dispenser pressure control
- 3D printer pneumatic extruder systems
- HVAC damper actuator feedback
Installation guidelines:
Mount in vibration-free locations using M3 screws (max 0.5Nm torque).
Maintain minimum 50mm clearance from electromagnetic sources.
Use thread sealant on ports - PTFE tape not recommended.
Perform zero-point calibration after 5000 cycles.
| Property | Property Value |
|---|---|
| sku | DPCP-0102008 |
| Pneumatic Connector | PT1/4 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.