Airtac ESV Solenoid Valve ESV430PEI
2. Connection interface mounting dimensions comply with ISO 5599-1 international standard;
3. Equipped with custom-engineered sealing components for enhanced flow capacity and extended service life;
4. Series 200/300/400 enable seamless conversion between internal pilot-operated, external pilot-operated, and pneumatically controlled configurations by adjusting the orientation of sealing components;
5. Base-mounted valve body design with options for single-unit or modular multi-unit bases, allowing flexible assembly into any required number of connected units;
6. Versatile base configurations with multiple air supply connections and mounting options for optimized usability;
7. Integrated exhaust throttling in Series 200/300/400 bases eliminates the need for external throttle valves.
Category: Solenoid Valves, Brand: AIRTAC, Series: ESV
AirTAC ESV430PEI Solenoid Valve Technical Specifications
- Model: ESV430PEI (Enhanced Safety Version)
- Valve type: 5/3-way closed center, double solenoid
- Port configuration: G1/8 (ISO228/1 standard)
- Operating pressure range: 0.05–1.0 MPa (7-145 PSI)
- Voltage variants: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Power consumption: 1.2W (DC models), 3.5VA (AC models)
- Maximum flow rate: 750 l/min (Cv=1.3 at 0.5MPa)
- Weight: 385g ±2% (including connectors)
- Dimensions: 62mm(W) × 58mm(H) × 37mm(D) (excluding fittings)
- Seal materials: HNBR main seals with FKM secondary wipers
- Temperature tolerance: -10℃ to 80℃ (non-freezing environment)
- Response time: ≤25ms (energize), ≤35ms (de-energize)
- Protection class: IP67 (dust tight, protected against temporary immersion)
- Port thread depth: 12mm (minimum engagement required)
The ESV430PEI represents AirTAC's premium pneumatic control solution featuring triple-coil protection and anti-vibration design. Its stainless steel armature tube ensures extended cycle life (10M+ operations) in high-humidity environments. The valve incorporates surge suppression circuitry for voltage spike protection and supports manifold mounting with ISO 5599/1 footprint compatibility.
- Multi-axis CNC machine tool changers
- Beverage filling line diverters with CIP systems
- Lithium battery production vacuum handling
- Semiconductor wafer handling robots
- Textile machinery tension control systems
Installation requirements:
Maintain ≤3° deviation from vertical axis during mounting. Use M3.5 grade
or better mounting screws with 0.6-0.8Nm torque. For horizontal piping,
install downstream moisture separator (40μm filter + auto-drain).
- Lubrication: Every 5M cycles (use ISO VG32 pneumatic oil)
- Diaphragm inspection: Annual replacement recommended
- Coil resistance check: Quarterly (20°C baseline: 36Ω±10% for DC24V)
| Property | Property Value |
|---|---|
| sku | ESV430PEI |
| Standard Voltage | DC24V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.