Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJW
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJW is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/2"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight500 g
About the Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJW
The GAFR300N15ASJW is a filter and regulator combined into a single body, so the incoming air is cleaned and then set to a steady outlet pressure without needing separate components. This 1/2in model operates from 0.15-0.9 MPa (20-130 psi) and uses a 5 um filter element to trap fine particles.
Its nylon bowl and automatic drain make it suitable for lines where regular manual draining is impractical. The circular gauge with MPa/psi scale is fitted, and the unit weighs 500 g, indicating a size class that needs proper mounting rather than support from tubing.
Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJW Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJW |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJW
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJW Is Used
Precision valve control
Feed a bank of precision pneumatic valves that need clean, regulated air at a steady pressure. The 5 um element removes fine particles that could clog small orifices, while the regulator holds the setpoint as line pressure varies.
Machine tool air supply
Supply a single machine tool with filtered and regulated air for actuation and control circuits. The 1/2in port and 60 cc bowl handle moderate condensate loads, and the automatic drain keeps the unit functioning in unattended shifts.
Test bench setup
Use on a test bench where a stable, clean air supply is needed for gauges or sensors. The fitted gauge shows the set pressure directly, and the self-locking knob resists drift from bench vibration.
Is the Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJW the Right Air-Prep Unit?
Choose the GAFR300 body for 1/2in ports with a 60 cc condensate bowl and a flow curve plotted to 3500 L/min at 0.7 MPa inlet, which is a step up from the GAFR200's 25 cc bowl. The nylon bowl is a build choice, and the automatic drain handles condensate without manual intervention. This model has no mounting bracket (J), so plan for a panel or existing bracket, and the 5 um element suits precision applications but requires more frequent service than the standard 40 um. The PT thread means the gauge reads in MPa/psi, and since this is a standard type, it covers the full 0.15-0.9 MPa range. If oil is needed downstream, order the matching GAFC300-15 combination instead. Note that 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/2" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJW FAQ
This filter & regulator has a 1/2in port, operates from 0.15-0.9 MPa (20-130 psi), with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, it has a 60 cc condensate bowl, and weighs 500 g. It uses a 5 um element and has an automatic drain.
The N before the port code indicates a nylon bowl, which is one of three material options (PC, metal, or nylon) with the same pressure and temperature ratings. The J code means the mounting bracket is not included, so you need to provide your own panel mount or use an existing bracket.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.