Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJWK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJWK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/2"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight500 g
About the Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJWK
The GAFR300N15ASJWK is a filter and pressure regulator combined into a single body, saving rail space and reducing potential leak points compared to separate units. It handles a 1/2in port with a 500 g mass, placing it in the mid-range GAFR300 class for shop-floor air preparation.
This version ships with a 5 um element for finer particle removal, a nylon bowl, and an automatic drain that ejects condensate without manual attention. Its standard pressure range is 0.15-0.9 MPa (20-130 psi), and the fitted circular gauge shows the outlet pressure on an MPa/psi scale.
Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJWK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJWK |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Not included (J) |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJWK
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJWK Is Used
Precision valve control
Feed a bank of precision pneumatic valves on a machining fixture. The 5 um element protects small orifices from fine wear particles, while the balanced regulator holds the set pressure steady as the shop supply fluctuates.
Conveyor tensioning station
Maintain consistent air pressure for a conveyor belt tensioning cylinder. The automatic drain handles condensate in humid environments, and the 1/2in port delivers adequate flow for the 3500 L/min plotted envelope at 0.7 MPa inlet.
Test bench air supply
Supply a clean, regulated air source to a test bench with multiple outlets. The 60 cc drain bowl and 500 g body provide a stable platform, while the nylon bowl offers a lightweight alternative to metal in dry indoor conditions.
Is the Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJWK the Right Air-Prep Unit?
Choose the GAFR300 body when you need 1/2in ports and a 60 cc drain bowl, stepping up from the GAFR200's 25 cc bowl for less frequent draining. The nylon bowl is a build choice; confirm compatibility with your environment since the 1.0 MPa (145 psi) maximum and -5 to 70 C range apply to all bowl materials. This model has an automatic drain for wet or unattended lines, no mounting bracket (J) for panel-mount installations, and a 5 um element for finer filtration than the standard 40 um. The PT thread means the gauge reads MPa/psi, and the reverse-flow (reflux) valve is fitted as an ordering difference. If your line needs oil downstream, order the matching GAFC300-15 combination instead. With a 1.0 MPa max supply, you have about 0.1 MPa above the 0.9 MPa top of the regulated band for setpoint headroom.
Quick checklist
- ✓ Body size for your peak flow (1/2" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJWK FAQ
The GAFR300N15ASJWK is a filter & regulator with a 1/2in port, 60 cc drain bowl, and 500 g weight. It operates from 0.15-0.9 MPa (20-130 psi) with a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi). Temperature range is -5 to 70 C, and it has a 5 um element with an automatic drain.
The K code indicates the reverse-flow (reflux) valve is fitted as an ordering difference. The catalogue defers its function to a separate page not included in our data, so we cannot explain its operation. It is simply a factory-fitted option on this specific model.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR300N15ASJWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.