Airtac GAFR Adjustable Filter Regulator GAFR300N15ASW
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR300N15ASW is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/2"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight500 g
About the Airtac GAFR Adjustable Filter Regulator GAFR300N15ASW
The GAFR300N15ASW is a filter and regulator combined into one body, handling both filtration and pressure control in a single unit. It comes with a 1/2in port, a 0.15-0.9 MPa (20-130 psi) working range, and a 5 um element for trapping finer particles.
This model features a nylon bowl and an automatic drain, making it suitable for unattended operation. The circular gauge is fitted and reads in MPa/psi, while the mounting bracket is included for installation. The unit weighs 500 g and has a 60 cc condensate bowl.
Airtac GAFR Adjustable Filter Regulator GAFR300N15ASW Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR300N15ASW |
|---|---|
| Series | GAFR300 filter & regulator |
| Port size | 1/2" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | Nylon |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Bracket | Included |
| Weight | 500 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR300N15ASW
| GAFR300 | GA300 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC300-15 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR300 · 1/2" · curve to 3500 L/min |
|---|---|
| One size down | GAFR200 |
| One size up | GAFR400 (curve to 7000 L/min) |
| Add a lubricator | GAFC300-15 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR300N15ASW Is Used
Precision valve control
Feed a bank of precision pneumatic valves that require clean, regulated air at a steady pressure. The 5 um element removes fine particles that could affect valve performance.
Machine tool air supply
Supply a single machine tool with filtered and regulated air. The 1/2in port supports moderate flow demands, while the automatic drain reduces maintenance in continuous operation.
Test bench setup
Use on a test bench where a clean, stable air supply is needed for calibration or testing. The included gauge lets you verify the set pressure directly.
Is the Airtac GAFR Adjustable Filter Regulator GAFR300N15ASW the Right Air-Prep Unit?
Choose the GAFR300N15ASW when you need a 1/2in port with a 5 um element for finer filtration. The nylon bowl offers a different build option compared to PC or metal, and the automatic drain handles condensate without manual intervention. The standard pressure type covers 0.15-0.9 MPa, and the included bracket simplifies mounting. If oil is needed downstream, order the matching GAFC300-15 combination. A 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/2" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 500 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC300-15 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR300N15ASW FAQ
The GAFR300N15ASW has a working pressure range of 0.15-0.9 MPa (20-130 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, has a 60 cc drain bowl, and weighs 500 g.
The 5 um element traps much finer particles than the standard 40 um element. This is beneficial for protecting sensitive components like precision valves or instruments, though it may require more frequent element service due to the finer filtration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR300N15ASW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.