Airtac GAFR Adjustable Filter Regulator GAFR40015SW
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR40015SW is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.9 MPa (20 - 130 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/2"
- Pressure range0.15 - 0.9 MPa (20 - 130 psi)
- Filtering grade5 µm
- Bowl materialPC
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight880 g
About the Airtac GAFR Adjustable Filter Regulator GAFR40015SW
The GAFR40015SW is a filter & regulator from AirTAC, combining a diversion filter and a balanced pressure regulator in a single body. This 1/2in unit handles 0.15-0.9 MPa (20-130 psi) and uses a 5 um element to trap fine particles for sensitive equipment.
Its 100 cc condensate bowl and 880 g mass indicate a mid-size class meant for machine-level installation, not handheld tools. The circular gauge with MPa/psi scale is fitted, and the pressed-in self-locking knob resists drift from vibration, keeping the set pressure stable.
Airtac GAFR Adjustable Filter Regulator GAFR40015SW Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR40015SW |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 1/2" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Type | Standard |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Included |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR40015SW
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| S | Standard type — 0.15 - 0.9 MPa (20 - 130 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-15 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 1/2" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-15 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR40015SW Is Used
Precision valve control
Feed a bank of precision pneumatic valves with clean, regulated air. The 5 um element protects fine internal passages from particle wear.
Machine tool circuits
Mount on a lathe or milling machine to supply steady pressure to work-holding clamps and coolant actuators, with the gauge for quick setpoint checks.
Test bench supply
Use on a laboratory test bench where a stable 0.15-0.9 MPa supply is needed for calibration fixtures. The 100 cc bowl handles moderate condensate between checks.
Is the Airtac GAFR Adjustable Filter Regulator GAFR40015SW the Right Air-Prep Unit?
Choose the GAFR400 body when you need a 1/2in port and a flow envelope plotted to 7000 L/min at 0.7 MPa inlet. This model includes the mounting bracket and a circular gauge, with a 5 um element for finer filtration than the standard 40 um. The semi-auto drain requires manual attention, so consider the A code for automatic draining on wet lines. The PT thread means the gauge reads MPa/psi, matching most local installations.
For lines needing lubrication downstream, the matching GAFC400-15 combination adds a lubricator. Note that the 1.0 MPa max supply leaves about 0.1 MPa above the 0.9 MPa top of the range.
Quick checklist
- ✓ Body size for your peak flow (1/2" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 100 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 880 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-15 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR40015SW FAQ
This filter & regulator has a 1/2in port, working pressure 0.15-0.9 MPa (20-130 psi), max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature range -5 to 70 C, 100 cc drain bowl, and weighs 880 g. It uses a 5 um element and has a semi-auto plus manual drain.
A GAF400 only filters the air. The GAFR40015SW also regulates the outlet pressure in the same body, replacing two separate units. It does not add lubrication; for that, order the GAFC400-15 combination.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR40015SW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.