Airtac GAFR Adjustable Filter Regulator GAFR400C15ALNWK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR400C15ALNWK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 1/2" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size1/2"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeNot fitted
- Weight880 g
About the Airtac GAFR Adjustable Filter Regulator GAFR400C15ALNWK
The GAFR400C15ALNWK is a filter and pressure regulator combined into a single body, so it cleans incoming air and stabilizes outlet pressure without needing separate components. This 1/2in version weighs 880 g and uses a 5 um filter element to catch fine particles before they reach downstream equipment.
Its lower-pressure regulator is set for 0.15-0.4 MPa (20-58 psi), and the automatic drain clears the 100 cc metal condensate bowl without manual attention. A reverse-flow valve is fitted, and the mounting bracket is included for secure panel installation.
Airtac GAFR Adjustable Filter Regulator GAFR400C15ALNWK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR400C15ALNWK |
|---|---|
| Series | GAFR400 filter & regulator |
| Port size | 1/2" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 100 cc |
| Bracket | Included |
| Weight | 880 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAFR400 is 1/4" if you add one. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR400C15ALNWK
| GAFR400 | GA400 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 15 | Port size 1/2". This body offers 10 = 3/8", 15 = 1/2". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Mounting bracket included. |
| N | No pressure gauge; 1/4" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC400-15 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR400 · 1/2" · curve to 7000 L/min |
|---|---|
| One size down | GAFR300 |
| One size up | GAFR500 (curve to 8000 L/min) |
| Add a lubricator | GAFC400-15 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR400C15ALNWK Is Used
Precision valve control
Feed a bank of precision pneumatic valves that need clean, regulated air at a consistent lower pressure, with the 5 um element protecting sensitive internals.
Wet compressor lines
Mount on a machine header fed by a wet compressor line where the automatic drain handles frequent condensate without operator rounds.
Test rigs and benches
Supply a laboratory test rig requiring stable low-pressure air, where the metal bowl suits a permanent installation and the bracket secures the 880 g unit.
Is the Airtac GAFR Adjustable Filter Regulator GAFR400C15ALNWK the Right Air-Prep Unit?
Choose this GAFR400 when you need a 1/2in port with a 100 cc metal bowl and automatic drain for wet or unattended lines. The 5 um element suits precision valves or instrument air, while the lower-pressure type tops out at 0.4 MPa, so confirm your system never needs more. The included bracket simplifies mounting, and the no-gauge option means the 1/4in gauge connection is ready if you add one later. For oil downstream, order the GAFC400-15 combination instead. With a 1.0 MPa max supply, you have about 0.6 MPa above this unit's 0.4 MPa regulated top, giving ample inlet margin for stable output.
Quick checklist
- ✓ Body size for your peak flow (1/2" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 100 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 880 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC400-15 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR400C15ALNWK FAQ
This filter & regulator has a 1/2in port, a 0.15-0.4 MPa (20-58 psi) working range, a 1.0 MPa (145 psi) maximum pressure, and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, has a 100 cc drain bowl, and weighs 880 g.
The L type limits regulation to 0.15-0.4 MPa for applications that never need higher output. The K code indicates a reverse-flow (reflux) valve is fitted, which is an ordering difference from standard models.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR400C15ALNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.