Airtac GAFR Adjustable Filter Regulator GAFR500C20LJWK
The AirTAC Airtac GAFR Adjustable Filter Regulator GAFR500C20LJWK is a genuine two-in-one filter & regulator — a diversion-type water/particulate filter and a balanced pressure regulator built into ONE body. It has 3/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi). It has no lubricator, so it adds no oil to the airflow.
- TypeFilter & regulator
- Port size3/4"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialMetal
- Drainsemi-auto + manual
- Pressure gaugeCircular, MPa / psi
- Weight950 g
About the Airtac GAFR Adjustable Filter Regulator GAFR500C20LJWK
The GAFR500C20LJWK is a filter and regulator combined into one robust metal body, saving rail space and reducing potential leak points compared to separate units. This 3/4in version operates in the lower pressure band of 0.15-0.4 MPa (20-58 psi) and comes with a 5 um element for finer filtration.
Its 108 cc metal condensate bowl and semi-auto plus manual drain handle collected water and solids, while the fitted circular gauge with MPa/psi scale shows outlet pressure. The pressed-in self-locking knob resists vibration drift, keeping your set pressure stable in demanding environments.
Airtac GAFR Adjustable Filter Regulator GAFR500C20LJWK Technical Specifications
| Model | Airtac GAFR Adjustable Filter Regulator GAFR500C20LJWK |
|---|---|
| Series | GAFR500 filter & regulator |
| Port size | 3/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 108 cc |
| Bracket | Not included (J) |
| Weight | 950 g |
Specifications follow the official AirTAC GAFR catalogue (pages 235-236). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code. This unit filters and regulates only; it does not add lubrication.
Model Code: Airtac GAFR Adjustable Filter Regulator GAFR500C20LJWK
| GAFR500 | GA500 series filter & regulator — sets the port range, drain-bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 20 | Port size 3/4". This body offers 20 = 3/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| J | No bracket (J) — supplied without the mounting bracket. |
| (blank) | Circular pressure gauge fitted. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
The filter and the regulator are ONE body here — there is no separate GAF filter or GAR regulator part to assemble. Need lubrication downstream too? Add a lubricator by ordering the matching GAFC500-20 F.R.L. combination instead.
Size Class & Flow Envelope
- GAFR2001/8"-1/4" · 2000 L/min
- GAFR3001/4"-1/2" · 3500 L/min
- GAFR4003/8"-1/2" · 7000 L/min
- GAFR5003/4" · 8000 L/min
- GAFR6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAFR500 · 3/4" · curve to 8000 L/min |
|---|---|
| One size down | GAFR400 |
| One size up | GAFR600 (curve to 12000 L/min) |
| Add a lubricator | GAFC500-20 (F.R.L. combination) |
Where the Airtac GAFR Adjustable Filter Regulator GAFR500C20LJWK Is Used
Precision Valve Control
Feed a bank of precision pneumatic valves that require regulated low pressure and clean air. The 5 um element protects fine internal passages, while the lower pressure range suits delicate actuation tasks.
Machine Tool Header
Supply a regulated low-pressure header to multiple stations on a machine tool. The 3/4in port and 108 cc bowl handle moderate condensate loads, and the metal bowl resists rough shop floor conditions.
Test Rig Air Supply
Provide stable, low-pressure air to a test fixture or calibration rig. The self-locking knob maintains the set pressure despite nearby vibration, and the gauge allows precise adjustment verification.
Is the Airtac GAFR Adjustable Filter Regulator GAFR500C20LJWK the Right Air-Prep Unit?
Choose the GAFR500 body for 3/4in port lines needing up to 8000 L/min flow envelope at 0.7 MPa inlet. The metal bowl suits demanding environments, and the 5 um element traps finer particles for sensitive equipment. This model has no mounting bracket (J), so plan for panel mounting or an existing bracket, and the semi-auto plus manual drain requires periodic attention. The reverse-flow (reflux) valve is fitted as an ordering difference.
With a lower pressure type (L), this unit tops out at 0.4 MPa, so confirm your system never needs more. If oil is needed downstream, order the matching GAFC500-20 combination instead. Remember that 1.0 MPa max supply leaves about 0.6 MPa above the 0.4 MPa top of the range, so plan your inlet pressure accordingly.
Quick checklist
- ✓ Body size for your peak flow (3/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Bracket kept or removed (J); add a lubricator = GAFC
Installation & Maintenance Notes
- check Install with the airflow arrow: IN to OUT, gauge/knob accessible.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure with the pressed-in self-locking knob; pull to adjust, press to lock.
- check Drain condensate before the 108 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 950 g unit on its bracket, not on the tubing.
This is a filter and regulator only — it delivers filtered, pressure-set air with no added oil. If a downstream tool needs lubrication, add a separate lubricator or order the GAFC500-20 combination; do not expect an oil mist from this unit.
Airtac GAFR Adjustable Filter Regulator GAFR500C20LJWK FAQ
This filter & regulator has a 3/4in port, a pressure range of 0.15-0.4 MPa (20-58 psi), a maximum pressure of 1.0 MPa (145 psi), and a proof pressure of 1.5 MPa (215 psi). It operates in temperatures from -5 to 70 C, has a 108 cc metal drain bowl, and weighs 950 g. The 5 um element and semi-auto plus manual drain are included.
The L type limits the regulated output to a maximum of 0.4 MPa (58 psi), which is ideal for low-pressure applications but unsuitable if your system may require higher pressure later. This model also has no mounting bracket, so it must be panel-mounted or secured to an existing structure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAFR Adjustable Filter Regulator GAFR500C20LJWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.