Airtac HFTK Guided Parallel Type Pneumatic Gripper HFTK20
1、Integrated linear guide structure ensures superior rigidity and precision;
2、Bottom-mounted positioning dowel pins on linear guide prevent misalignment between guide and main body;
3、Deepened reference centering holes on main body enhance mounting accuracy and maintain consistent positioning during repeated installation/dismantling;
4、Customizable initial gripper position accommodates diverse operational requirements under various working conditions.
Category: Parallel Pneumatic Grippers , Brand: AirTAC , Series: HFTK
AirTAC HFTK20 Guided Parallel Pneumatic Gripper Specifications
- Model: HFTK20
- Type: Guided parallel gripper with linear slide mechanism
- Gripping force: 45N @ 0.6MPa (adjustable via pressure regulation)
- Stroke per jaw: 0-10mm (total opening range 20mm)
- Operating pressure: 0.2-0.7 MPa
- Slide type: Precision linear ball guideway
- Repeat accuracy: ±0.02mm
- Max operating speed: 200mm/s
- Ambient temperature: -10℃ to 70℃
- Body material: Anodized aluminum alloy (hard coating)
- Seal material: NBR rubber (FDA compliant options available)
- Port size: M5x0.8 (dual ports for simultaneous actuation)
- Mounting: 4x M4 threaded holes (bottom/top/side mounting)
- Weight: 520g ±2% (including guide rails)
- Dimensions: 150mm(L) × 58mm(W) × 38mm(H)
- Protection rating: IP67 (wipers integrated in guide blocks)
- Lubrication: Pre-lubricated (maintenance-free for 5,000km travel)
- Cycle life: 50 million cycles (under rated conditions)
High-precision parallel gripper featuring dual linear guideways for exceptional moment resistance and positional accuracy. The HFTK20's twin piston design ensures synchronous jaw movement with minimal angular deviation (<0.1°). Optimized flow channels enable rapid response times (opening/closing in 0.15s at 0.5MPa). Includes shock-absorbing rubber pads for noise reduction (≤65dB).
- PCB handling in SMT assembly lines
- Precision part insertion in automotive fuel injector assembly
- Medical device component sorting systems
- Glass panel transfer in display manufacturing
- Automated packaging of fragile food items
Installation tip:
For maximum accuracy, mount using reference surfaces on both X and Y axes.
Maintain 0.5-0.8MPa filtered air supply (40μm filter required).
Avoid lateral impacts exceeding 30N during operation.
- Special jaw plates (V-groove/anti-slip silicone/custom geometries)
- Magnetic sensor kit (HMB-LS10) for position feedback
- Heat-resistant variant (HFTK20-H) available for 100℃ environments
| Property | Property Value |
|---|---|
| sku | HFTK20 |
| Gripper Optional Types | Standard Type |
| Port Size | M5×0.8 |
| Lubrication | Please provide the specific AirTAC product attribute values that need translation, and I will return the accurate English terminology. |
| Bore Diameter | <20mm> |
| Stroke | <10mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.