Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X125SAF
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ16X125SAF Dual-Axis Precision Slide Cylinder Specifications
- Model: HLQ16X125SAF
- Type: Dual-axis guided pneumatic slide cylinder
- Bore size: 16mm
- Stroke: 125mm (±1mm tolerance)
- Operating pressure: 0.1–0.8 MPa
- Repeat positioning accuracy: ±0.01mm
- Max speed: 0.5 m/s (with cushioning)
- Load capacity: Axial 150N max / Radial 50N max
- Temperature range: -10℃ to 80℃
- Body material: Hard anodized aluminum alloy
- Seal material: Polyurethane (PU) with wear-resistant coating
- Mounting style: Horizontal or vertical (dual M5 threaded holes base)
- Cushioning type: Elastic ring + hydraulic buffer
- Port size: M5x0.8 (dual ports for X/Y axes)
- Weight: 1.8kg (without accessories)
- Dimensions: 300mm(L) × 60mm(W) × 60mm(H) (full extension)
High-precision dual-axis actuator combining pneumatic power with linear guide technology. Features chromium-plated piston rods (HRC60 hardness) and preloaded ball bearings for zero backlash operation. Integrated T-slot design allows modular accessory attachment. Requires 5μm filtered air and ISO VG32 hydraulic oil for buffer system.
- Semiconductor wafer handling robots
- Micro-dispensing systems in PCB assembly
- Optical lens positioning stages
- Precision fixture alignment in metrology
- Automated microscope slide handling
Installation tip:
Maintain 0.02mm/m flatness on mounting surface. Apply lithium soap grease
(NLGI #2) to guide rails monthly. Avoid lateral torque exceeding 3Nm during
mechanical linkage installation.
Critical note:
Maximum side load capacity reduces by 40% when operating at temperatures
above 60℃. Always use shock absorbers for strokes over 100mm in vertical
orientation.
| Property | Property Value |
|---|---|
| sku | HLQ16X125SAF |
| External Stop Block Type | Rear end stroke adjusting screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | 16mm |
| Stroke | 125mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.