Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X125SB
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ16X125SB Dual-Axis Precision Slide Cylinder Specifications
- Model: HLQ16X125SB
- Type: Dual-axis guided pneumatic slide cylinder
- Bore size: 16mm
- Stroke: 125mm (±0.5mm tolerance)
- Max thrust: 118N (at 0.63MPa)
- Repeat positioning accuracy: ±0.01mm
- Operating pressure: 0.1-0.8 MPa
- Max speed: 500mm/s
- Rod material: Stainless steel (SUS304) with hard chrome plating
- Body material: Aluminum alloy (surface hard anodized)
- Seal: High-grade polyurethane (PU) with wear-resistant design
- Temperature range: -20℃ to 80℃
- Protection rating: IP54 (standard), IP67 optional
- Weight: 1.65kg (with mounting brackets)
- Dimensions: 178mm(L) × 62mm(W) × 62mm(H) (Total length = base length + stroke: 53mm + 125mm)
- Mounting options: Horizontal/Vertical/Inverted orientation
- Lubrication: Pre-lubricated (Maintenance-free for 2000km travel)
High-rigidity dual-axis slide cylinder featuring crossed roller guides for exceptional moment resistance. The HLQ series combines pneumatic actuation with mechanical precision, using linear ball bearings for smooth motion. Includes adjustable cushioning mechanism (3-stage damping) and dual shock absorbers. Compatible with servo-pneumatic positioning systems through optional magnetic sensor slots (M9 connector ready).
- PCB component insertion machines
- Lens coating equipment positioning stages
- Medical device assembly with cleanroom requirements
- Automated optical inspection (AOI) systems
- Precision material handling in semiconductor FOUP loaders
Installation guidelines:
Use M4×8 mounting screws (ISO4762) with 0.6-0.8Nm torque.
Maintain 0.02mm maximum parallelism deviation between guide rails and driving force axis.
For vertical mounting, install air inlet at bottom port to prevent piston self-weight descent.
- Lateral stiffness: 45N/μm
- Maximum allowable moment: 12Nm (My), 8Nm (Mz)
- Dynamic load capacity: 980N (radial), 490N (axial)
- Static friction: ≤1.5N
| Property | Property Value |
|---|---|
| sku | HLQ16X125SB |
| External Stop Block Type | Double-Ended Hydraulic Shock Absorber |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | 16mm |
| Stroke | 125mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.