Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X30SAF
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ Series Dual-Axis Precision Slide Cylinder HLQ16X30SAF Technical Details
- Model: HLQ16X30SAF
- Series: HLQ Dual-Axis Slide Cylinder
- Bore Size: 16mm
- Stroke: 30mm (±1mm adjustment range)
- Structure: Dual-rod guided type
- Max Thrust: 78N (at 0.7MPa)
- Operating Pressure: 0.05-0.7 MPa
- Repeat Positioning Accuracy: ±0.01mm
- Maximum Speed: 500mm/s
- Buffer Type: Adjustable pneumatic cushion
- Lubrication: Non-lube (Pre-lubricated)
- Material:
- Cylinder Tube: Hard anodized aluminum alloy
- Piston Rod: Stainless steel (SUS304)
- Seals: Polyurethane (PU)
- Weight: 0.65kg (excluding accessories)
- Dimensions:
- Total Length (L): 106mm (30mm stroke + 76mm base)
- Width (W): 34mm (guide rail center distance)
- Height (H): 50mm (mounting surface to rod end)
- Operating Temperature: -10℃ to 80℃
- Protection Class: IP54 (Dust protected & water splashed)
High-precision dual-axis pneumatic slide cylinder featuring integrated linear guides and zero-backlash design. The chromium-plated guide shafts (HRC60 hardness) and ball bushings ensure smooth motion with ≤0.03mm/m alignment accuracy. Includes built-in magnet for sensor mounting and T-slot grooves for accessory integration.
- PCB component insertion machines
- Lens coating equipment positioning stages
- Automated optical inspection (AOI) systems
- Precision dispensing/pick-and-place robots
- Medical device assembly stations
Mounting Guidelines:
Maintain ≤0.1mm/m parallelism between cylinder and load. Use M4×8 mounting screws (ISO 4762) with 0.6-0.8Nm torque. For vertical installations, install air vents upward. Lubricate guide shafts every 500km travel distance using ISO VG32 hydraulic oil.
| Property | Property Value |
|---|---|
| sku | HLQ16X30SAF |
| External Stop Block Type | Rear end stroke adjusting screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | 16mm |
| Stroke | 30mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.