Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X40SBF
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ16X40SBF Dual-Axis Precision Slide Cylinder Specifications
- Model: HLQ16X40SBF
- Type: Dual-axis guided slide cylinder with linear bearings
- Bore size: 16mm
- Stroke: 40mm (±0.2mm tolerance)
- Repeat positioning accuracy: ±0.01mm
- Max speed: 1.2 m/s (with cushioning)
- Load capacity: 30N axial / 15N radial (dynamic)
- Operating pressure: 0.05–0.7 MPa
- Temperature range: -20℃ to 80℃
- Body material: Anodized aluminum alloy (AL6063-T5)
- Seal material: Polyurethane (PU) with wear-resistant coating
- Guide type: Dual linear ball bearings (precision ground)
- Lubrication: Pre-lubricated (maintenance-free for 2000km travel)
- Port size: M5x0.8 (dual ports for bidirectional control)
- Weight: 0.68kg (excluding accessories)
- Dimensions: 200mm(L) × 42mm(W) × 42mm(H) (full extended length: 240mm)
- Mounting: Side mounting slots (6mm width) with 32mm hole spacing
- Shock absorption: Adjustable rubber bumpers (front/rear)
A high-rigidity dual-axis slide cylinder combining pneumatic actuation with precision linear guidance. Features zero-backlash ball bearing guides and hardened stainless steel shafts (HRC60+) for exceptional repeatability. The compact profile enables clustered installations in space-constrained automation systems. Includes built-in air cushioning with adjustable damping screws for smooth end-stroke deceleration.
- Semiconductor wafer handling robots
- Optical lens positioning stages
- Automated inspection probe drives
- Precision dispensing equipment Z-axis control
- CNC tool changers
- Medical device assembly fixtures
Installation note:
Maintain 0.02mm/m alignment tolerance during mounting. Use precision shims if necessary.
Avoid side-load impacts during operation - maximum permissible moment load: 1.2Nm.
For vertical installations, add mechanical brake or counterbalance valve.
| Property | Property Value |
|---|---|
| sku | HLQ16X40SBF |
| External Stop Block Type | Retract End Hydraulic Cushion |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | 16mm |
| Stroke | <40mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.