Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75S
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ Series Dual-Axis Precision Slide Cylinder HLQ16X75S
- Model: HLQ16X75S
- Series: HLQ Dual-Axis Precision Type
- Bore size: 16mm
- Stroke: 75mm (±0.5mm tolerance)
- Mounting: Standard side/end mounting with M4x0.7 threaded holes
- Repeat positioning accuracy: ±0.01mm
- Max thrust: 123N (at 0.7MPa)
- Guide mechanism: Linear ball bearing dual-rail system
- Operating pressure: 0.05-0.7MPa
- Temperature range: -20℃ to 80℃
- Material: Aluminum alloy body (A6063-T5), hardened steel guide rods
- Seals: NBR rubber wipers & seals
- Weight: 1.35kg (excluding accessories)
- Dimensions: 200mm(L) × 82mm(W) × 54mm(H)
- Lubrication: Pre-lubricated (Grease life: 3,000km travel)
- Protection class: IP54 (standard wipers)
High-rigidity dual-axis slide cylinder featuring synchronized motion control through parallel guide rods and precision ground ball bushings. The HLQ16X75S combines minimal deflection (under 0.03mm at max load) with smooth linear motion, achieved through optimized preload adjustment and four-row ball bearing arrangement. Includes built-in shock absorbers for high-speed operation up to 1.5m/s.
- PCB component insertion machines
- Laser marking/engraving positioning stages
- Semiconductor wafer handling robots
- Optical lens alignment systems
- Automated microscope slide positioning
Installation protocol:
Mount on Class 7 flatness surface (≤10μm). Use torque-controlled tightening
(1.2N·m max for M4 screws). Align using master axis as reference, maintaining
≤0.05mm parallelism between guide rods. Perform 50-cycle dry run before load operation.
| Property | Property Value |
|---|---|
| sku | HLQ16X75S |
| External Stop Block Type | No External Stops |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | 16mm |
| Stroke | 75mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.