Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X125SA
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ Series Dual-Axis Precision Slide Cylinder HLQ20X125SA Technical Profile
- Model: HLQ20X125SA
- Structure: Dual-axis guided cylinder with integrated linear guide rails
- Bore size: Ø20mm
- Stroke: 125mm (customizable 25-300mm)
- Operating pressure: 0.1-0.9 MPa
- Piston speed: 50-800 mm/s (lubricated)
- Max thrust: 63N at 0.5MPa
- Repeat positioning accuracy: ±0.01mm
- Guide rail type: Ball bearing cross-roller structure
- Mounting options: Horizontal/Vertical/Inverted
- Rod material: Hard chrome-plated carbon steel
- Seal type: NBR + special wear-resistant ring
- Ambient temperature: -10℃ to 80℃
- Weight: 2.45kg (with standard fittings)
- Dimensions: 250mm(L) × 42mm(W) × 58mm(H)
- Accessory ports: M5x0.8 pneumatic ports (front/rear)
- Protection class: IP54 (standard), IP67 optional
Engineered for ultra-precise linear motion control, the HLQ20X125SA combines pneumatic actuation with mechanical guidance in a rigid aluminum alloy body. Its dual-axis design eliminates rotational deviation, achieving micron-level repeatability even under side load conditions. Features pre-loaded ball guides and built-in shock absorbers for smooth operation at high cycling rates (up to 5Hz).
- PCB component insertion machines
- Lens polishing equipment positioning stages
- Precision dispensing systems
- Automated optical inspection (AOI) fixtures
- Semiconductor wafer handling arms
Installation best practices:
Apply lithium soap-based grease to guide rails every 500km of travel.
Use vibration-damping mounts when operating above 3Hz. Maintain 0.3-0.5mm
clearance between adjacent components for thermal expansion.
| Property | Property Value |
|---|---|
| sku | HLQ20X125SA |
| External Stop Block Type | Stroke Adjustment Screws at Both Ends |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | PT1/8 |
| Magnet | S-Magnetic |
| Bore Diameter | <20mm> |
| Stroke | 125mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.