Airtac HLSL Precision Slide Table Cylinder HLSL8X30SAF
2、Pre-equipped positioning pin holes on guide rail for accurate mounting
3、Floating joint design prevents piston rod from bearing additional torsional loads
4、Dual piston rod configuration achieves double output force
5、Integrated positioning pin holes on main body for secure installation
6、Mounting screw holes provided on base surface and end faces
Category: Precision Slide Cylinder , Brand: AirTAC , Series: HLSL
AirTAC HLSL8X30SAF Precision Slide Table Cylinder Specifications
- Model: HLSL8X30SAF
- Type: Double-axis guided slide cylinder with auto-alignment
- Bore size: Ø8mm
- Stroke: 30mm (±0.5mm tolerance)
- Operating pressure: 0.05–0.9 MPa
- Cushioning: Adjustable pneumatic cushion (both ends)
- Guide structure: Dual chrome-plated steel rods
- Seal material: Polyurethane (PU) with wear-resistant ring
- Temperature range: -10℃ to 80℃
- Port size: M5x0.8 (standard) with G1/8 adaptor option
- Repeat positioning accuracy: ±0.01mm
- Protection rating: IP54 (standard dust/moisture resistance)
- Weight: 0.52kg (without accessories)
- Dimensions: 110mm(L) × 42mm(W) × 42mm(H) (full extension)
- Rod diameter: 4mm (hardened steel, chrome-plated)
- Max thrust: 18N at 0.6MPa
- Lubrication: Pre-lubricated (Grease-free operation available)
High-precision linear motion solution featuring dual hardened guide rods and anti-rotation mechanism. The HLSL8X30SAF incorporates a unique self-compensating bushing system that maintains alignment accuracy even under side load conditions. Its compact profile and integrated mounting slots (T-shaped on base) enable direct installation in tight spaces.
- Semiconductor wafer handling robots
- Micro-dispensing systems in PCB assembly
- Optical lens positioning stages
- Medical device testing equipment
- High-speed sorting mechanisms (up to 5Hz cycles)
Installation note:
Maintain parallelism within 0.05mm between mounting surfaces. Use only with guided loads - lateral forces must not exceed 3N. For continuous operation above 2Hz, install external guides or limit stroke to 80% of rated value.
- Initial 1,000km: Apply ISO VG32 turbine oil every 50km of travel
- Post-break-in: Lubricate every 200km or 6 months
- Clean air requirement: Class 5 (ISO 8573-1) with 1μm filter
| Property | Property Value |
|---|---|
| sku | HLSL8X30SAF |
| External Stop Block Type | Rear end stroke adjusting screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | <8mm> |
| Stroke | 30mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.