Airtac JSI Series Standard Cylinder JSI100X160STC
The AirTAC Airtac JSI Series Standard Cylinder JSI100X160STC is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X160STC
Delivering 3927 N of push force at 0.5 MPa, the AirTAC JSI100X160STC is a robust double-acting JIS-standard profile cylinder built for heavy-duty machinery. Its extruded hard-anodized aluminum barrel omits external rods, making the unit noticeably shorter and more compact than an ISO 15552 cylinder of the same 100 mm bore. The internal two-way piston seal retains grease, ensuring long, low-friction operation across the 160 mm stroke.
Equipped with a piston magnet, this SKU directly accepts CMSE and DMSE electronic or reed switches in the side grooves for precise end-position detection. Plan for roughly 2356 N of real work at 0.5 MPa, which translates to lifting about 200 kg vertically with a 2:1 safety margin. The G1/2 air port and M26x1.5 rod thread handle high flow rates required for moving substantial masses at speeds of 30-800 mm/s.
Airtac JSI Series Standard Cylinder JSI100X160STC Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X160STC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X160STC
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X160STC Is Used
Injection Mold Clamping
Provides the 3927 N push force required to secure heavy injection mold halves, utilizing the TC trunnion to accommodate slight alignment shifts during press cycles.
Pallet Diverting
Shifts loaded pallets on a high-throughput packaging line, where the 160 mm stroke and compact JIS profile keep the diverting mechanism within tight conveyor clearances.
Heavy Crate Pushing
Ejects dense wooden crates from an assembly station, safely moving loads under the 200 kg vertical lift threshold without requiring a larger bore size.
Is the Airtac JSI Series Standard Cylinder JSI100X160STC the Right Cylinder?
When sizing this 100 mm bore, stepping down to a JSI63 yields 1559 N of push force at 0.5 MPa, while moving up to a JSI125 provides 6136 N. The included TC trunnion mount is ideal for pivoting applications, but remember that a standard cylinder drifts if air pressure is lost or the valve is centered; the adjustable air cushion only decelerates the piston near stroke end. For suspended loads that must remain fixed during exhaust, integrate an external rod lock or pilot-operated check valve. The -S magnet pairs perfectly with DMSE sensors for reliable switching.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X160STC FAQ
At 0.5 MPa it provides 3927 N push and 3574 N pull force. At 0.7 MPa it delivers 5497 N push and 5003 N pull. The theoretical maximum force is 801 kgf at 1.0 MPa. It uses a G1/2 air port and features a 33 mm adjustable air cushion at both ends.
It is a JIS-standard profile cylinder that is shorter and more compact than an ISO 15552 equivalent of the same bore. Because this SKU includes the -S magnet, you can drop CMSE or DMSE reed and electronic switches directly into the side sensor grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X160STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.