Airtac JSI Series Standard Cylinder JSI100X175
The AirTAC Airtac JSI Series Standard Cylinder JSI100X175 is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X175
Delivering 3927 N of push force at 0.5 MPa, the AirTAC JSI100X175 is a JIS-standard profile cylinder built for heavy-duty automation. Its extruded hard-anodized aluminum barrel omits external rods, making the unit noticeably shorter and more compact than an ISO 15552 cylinder of the same 100 mm bore. The design incorporates a two-way piston seal that retains grease, ensuring long, low-friction life.
This double-acting actuator features a 32 mm carbon steel rod with a 20 um hard chrome plating, a G1/2 air port, and adjustable 33 mm air cushions at both ends to decelerate the piston smoothly. Because this specific SKU lacks the -S magnet suffix, it cannot host CMSE or DMSE position sensors. Plan for roughly 2356 N of real work at 0.5 MPa, which translates to lifting about 200 kg vertically with a 2:1 safety margin.
Airtac JSI Series Standard Cylinder JSI100X175 Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X175 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X175
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X175 Is Used
Injection Mold Clamping
Provides 3927 N of thrust at 0.5 MPa to hold heavy mold halves securely in place during plastic injection cycles.
Press Feed Ejection
Uses its 175 mm stroke and 3574 N pull force to eject dense metal stampings from a 200-ton mechanical press bed.
Pallet Stopper Gate
Acts as a high-force physical stop barrier on heavy-duty pallet conveyors, halting loads up to 200 kg safely.
Is the Airtac JSI Series Standard Cylinder JSI100X175 the Right Cylinder?
When sizing this 100 mm bore, stepping down to a JSI63X175 yields 1559 N of push force at 0.5 MPa, while stepping up to a JSI125X175 provides 6136 N. The 175 mm stroke keeps the rod well-supported, but always verify your mounting choice—LB foot, FA/FB flange, CA/CB/CR clevis, TC/TCM1/TCM2 trunnion, or an I/Y/F/U rod knuckle—matches your mechanical linkage. Note that a standard cylinder drifts when air is lost or a valve is centered; the cushions only decelerate the stroke end and do not act as a brake. For suspended loads, specify an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X175 FAQ
The JSI100X175 delivers a push of 3927 N and a pull of 3574 N at 0.5 MPa, and a push of 5497 N and a pull of 5003 N at 0.7 MPa. Its theoretical maximum force is 801 kgf at 1.0 MPa. The air port size is G1/2.
It is a JIS-standard profile cylinder that is shorter and more compact than an ISO 15552 cylinder of the same 100 mm bore. Also, because this SKU lacks the -S magnet, it cannot accept CMSE or DMSE sensors; you would need the JSI100X175-S variant for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.