Airtac JSI Series Standard Cylinder JSI100X175S
The AirTAC Airtac JSI Series Standard Cylinder JSI100X175S is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X175S
Delivering 3927 N of push force at 0.5 MPa, the AirTAC JSI100X175S is a double-acting JIS-standard profile cylinder built for tight machinery layouts. Its extruded hard-anodized aluminum barrel omits external rods, making the overall body shorter and more compact than a same-bore ISO 15552 unit. The integrated -S piston magnet allows CMSE and DMSE switches to drop directly into the side sensor grooves for precise position detection.
The bore dictates a G1/2 port and an M26x1.5 rod-end thread, while a 33 mm adjustable air cushion at both ends decelerates the 30-800 mm/s travel smoothly. A heterogeneous two-way piston seal retains grease for a long, low-friction service life. Plan for about 2356 N of real work at 0.5 MPa, which translates to lifting roughly 200 kg vertically with a 2:1 safety margin.
Airtac JSI Series Standard Cylinder JSI100X175S Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X175S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X175S
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X175S Is Used
Injection Mold Clamping
Provides 3927 N of push at 0.5 MPa to secure mid-sized injection mold halves, utilizing the 175 mm stroke to clear the part ejection zone.
Heavy Pallet Diversion
Actuates a diverter arm on a packaging line to reroute heavy loaded pallets, with the -S magnet triggering DMSE sensors to confirm full extension.
Vertical Lift Gate
Raises a 150 kg material handling lift gate through its 175 mm travel, safely operating well within the 200 kg vertical lift capacity at 0.5 MPa.
Is the Airtac JSI Series Standard Cylinder JSI100X175S the Right Cylinder?
When sizing this 100 mm bore, stepping down to the JSI80X125 yields 2513 N of push force at 0.5 MPa, while moving up to the JSI125 provides 6136 N for heavier demands. Because this SKU includes the -S magnet, it is fully ready for CMSE or DMSE position sensing. Remember that the standard air cushion only decelerates the piston near the stroke ends; it will not hold a load vertically if air pressure drops. For suspended loads, install an external rod lock or a pilot-operated check valve to prevent drift.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X175S FAQ
At 0.5 MPa it provides 3927 N of push and 3574 N of pull. At 0.7 MPa the push is 5497 N and pull is 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. The air port size is G1/2.
The JSI series follows JIS standards and uses an extruded hard-anodized aluminum barrel without external rods. This profile design makes it shorter and more compact than an ISO 15552 cylinder of the same 100 mm bore, saving valuable machine space.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.