Airtac JSI Series Standard Cylinder JSI100X80SLB
The AirTAC Airtac JSI Series Standard Cylinder JSI100X80SLB is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 80mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke80 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X80SLB
Delivering 3927 N of push force at 0.5 MPa, the AirTAC JSI100X80SLB is a double-acting JIS-standard profile cylinder built for heavy-duty automation. Its extruded hard-anodized aluminum barrel omits external rods, making the unit significantly shorter and more compact than an ISO 15552 cylinder of the same 100 mm bore. A heterogeneous two-way piston seal retains grease for long, low-friction life.
The integrated -S piston magnet allows CMSE or DMSE switches to drop directly into the side grooves for position sensing. Plan for about 2356 N of real work at 0.5 MPa, which translates to lifting roughly 200 kg vertically with a 2:1 safety margin. The G1/2 port and M26x1.5 rod thread handle the high airflow and force demands of this 80 mm stroke unit.
Airtac JSI Series Standard Cylinder JSI100X80SLB Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X80SLB |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X80SLB
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X80SLB Is Used
Injection Mold Clamping
Provides 3927 N of clamping force at 0.5 MPa to secure mid-sized injection mold halves during material injection cycles.
Heavy Pallet Diversion
Pushes loaded pallets off a main conveyor line, handling the 200 kg vertical lift equivalent with smooth cushioned stops.
Automated Press Feeding
Drives heavy sheet metal blanks into a forming press, utilizing the compact JIS profile to fit tight workstation footprints.
Is the Airtac JSI Series Standard Cylinder JSI100X80SLB the Right Cylinder?
For applications needing less force, the 80 mm bore provides 2513 N push at 0.5 MPa, while stepping up to the 125 mm bore yields 6136 N. This 100 mm bore ships with an LB foot mount for secure base mounting. Since this SKU includes the -S magnet, it is fully ready for CMSE/DMSE sensors. If air pressure drops, the piston will drift; use an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X80SLB FAQ
At 0.5 MPa it delivers 3927 N push and 3574 N pull. At 0.7 MPa it provides 5497 N push and 5003 N pull. The theoretical maximum force is 801 kgf at 1.0 MPa. The air port size is G1/2.
It is a JIS-standard profile cylinder that is shorter and more compact than an ISO 15552 cylinder of the same 100 mm bore. The LB foot mount provides rigid base mounting, and the built-in -S magnet supports CMSE/DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X80SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.