Airtac JSI Series Standard Cylinder JSI32X150TC
The AirTAC Airtac JSI Series Standard Cylinder JSI32X150TC is a genuine double acting JIS-standard air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI32X150TC
Delivering 402 N of push force at 0.5 MPa, the AirTAC JSI32X150TC is a JIS-standard double-acting profile cylinder engineered for tight machinery layouts. Its extruded hard-anodized aluminum barrel omits external rods, making the unit significantly shorter and more compact than an equivalent ISO 15552 model of the same 32 mm bore.
This 150 mm stroke variant utilizes a two-way NBR piston seal that retains grease for low-friction longevity, while the 20 mm adjustable air cushions at both ends absorb end-of-stroke impact. Plan for roughly 241 N of actual work at 0.5 MPa, which translates to lifting about 20 kg vertically with a 2:1 safety margin. Featuring a G1/8 port and an M10x1.25 rod thread, this specific SKU lacks the -S magnet, meaning it cannot host CMSE or DMSE position switches.
Airtac JSI Series Standard Cylinder JSI32X150TC Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI32X150TC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI32X150TC
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI32X150TC Is Used
Small Part Ejection
Pushes lightweight plastic mouldings out of a 32 mm bore press using 402 N of force at 0.5 MPa.
Package Diverting
Uses the 150 mm stroke and TC trunnion to pivot lightweight cardboard cartons off a packing line.
Clamp Actuation
Secures small electronic housings during ultrasonic welding, safely applying about 241 N of working load.
Is the Airtac JSI Series Standard Cylinder JSI32X150TC the Right Cylinder?
When sizing this 32 mm bore, dropping down is not an option as it is the smallest JSI available, while stepping up to a 40 mm bore increases the 0.5 MPa push force to 628 N. Because this is a standard 150 mm stroke, side-load risks remain moderate, but always ensure the TC trunnion mount allows free pivoting to prevent rod bending. Note that a plain cylinder drifts when air is lost or the valve centers; the cushions only decelerate the piston near stroke end and will not hold a load, so deploy an external rod lock or pilot-operated check valve for suspended masses.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI32X150TC FAQ
At 0.5 MPa it provides 402 N push and 345 N pull; at 0.7 MPa it yields 563 N push and 483 N pull. The theoretical maximum is 82 kgf at 1.0 MPa, and the air port is G1/8.
It is a JIS-standard profile cylinder that is shorter and more compact than an ISO 15552 unit of the same bore. It does not hold position if air is lost, as the cushions only decelerate the piston, requiring an external rod lock for suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI32X150TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.