Airtac JSI Series Standard Cylinder JSI32X200
The AirTAC Airtac JSI Series Standard Cylinder JSI32X200 is a genuine double acting JIS-standard air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI32X200
Delivering 402 N of push force at 0.5 MPa, the AirTAC JSI32X200 is a JIS-standard double-acting profile cylinder engineered for tight machinery layouts. Its extruded, hard-anodized aluminum barrel omits external rods entirely, making the overall body significantly shorter and more compact than a same-bore ISO 15552 unit. The bore is 32 mm, the stroke is 200 mm, and the air ports are G1/8.
Because this specific SKU lacks the -S magnet suffix, it cannot accept CMSE or DMSE position switches. For real-world sizing, plan for about 241 N of actual work at 0.5 MPa, which equates to lifting roughly 20 kg vertically with a 2:1 safety margin. A heterogeneous two-way piston seal retains grease internally, ensuring smooth, low-friction cycling across the 30-800 mm/s speed range.
Airtac JSI Series Standard Cylinder JSI32X200 Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI32X200 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI32X200
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI32X200 Is Used
Small Part Ejection
Pushes lightweight plastic moldings out of an injection press using 402 N of force over a 200 mm travel distance.
Gate Diverter
Actuates a sorting flap on a packaging line where a shorter profile cylinder is required to fit between conveyor frames.
Clamp Actuation
Secures thin sheet metal in a CNC press brake fixture, applying 345 N of pull force at 0.5 MPa.
Is the Airtac JSI Series Standard Cylinder JSI32X200 the Right Cylinder?
If 402 N of push is insufficient, the next size up is the JSI40X200, which provides 628 N at 0.5 MPa; there is no smaller bore in the JSI line, so 32 mm is the floor for compact jobs. With a 200 mm stroke, side-loading is minimal, but always ensure rigid mounting using LB foot brackets, FA/FB flanges, or an I/Y/F/U rod knuckle. Remember that a standard cylinder drifts when air is lost or the valve centers, as the end cushions only decelerate the piston rather than locking it; use a pilot-operated check valve if you need to suspend a load safely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI32X200 FAQ
The JSI32X200 delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push and 483 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa. It features a 32 mm bore, a 12 mm rod, M10x1.25 rod thread, and a G1/8 air port.
It is a JIS-standard profile cylinder that is physically shorter and more compact than an ISO 15552 cylinder of the same 32 mm bore, saving space on machinery. Note that this specific SKU lacks a magnet, so it cannot host CMSE or DMSE sensors without upgrading to the -S variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.