Airtac JSI Series Standard Cylinder JSI32X90STC
The AirTAC Airtac JSI Series Standard Cylinder JSI32X90STC is a genuine double acting JIS-standard air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke90 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI32X90STC
Delivering 402 N of push force at 0.5 MPa, the AirTAC JSI32X90STC is a 32 mm bore double-acting JIS-standard profile cylinder that saves valuable machine space by being noticeably shorter than an ISO 15552 cylinder of the same bore. The extruded hard-anodized aluminum barrel omits external rods to resist wear, while the two-way piston seal retains grease for a long, low-friction service life. Because this SKU includes the -S magnet, it readily accepts CMSE or DMSE electronic switches in the side grooves for position sensing.
With a 90 mm stroke and a G1/8 port, it is well-suited for compact actuation tasks. Plan for roughly 241 N of real work at 0.5 MPa, which translates to lifting about 20 kg vertically with a 2:1 safety margin. The adjustable air cushions at both ends provide smooth deceleration near the stroke limits.
Airtac JSI Series Standard Cylinder JSI32X90STC Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI32X90STC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI32X90STC
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI32X90STC Is Used
Small Part Ejection
Pushes lightweight plastic moldings out of an injection press with 402 N of force at 0.5 MPa.
Diverting Mechanism
Actuates a 90 mm stroke diverter arm to route small packages on a packaging conveyor line.
Clamp Actuation
Secures electronic PCBs during soldering, using the built-in magnet for precise end-of-stroke confirmation.
Is the Airtac JSI Series Standard Cylinder JSI32X90STC the Right Cylinder?
When sizing this 32 mm bore, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa, while the JSI32 is the smallest available option in the series. The included TC trunnion mount provides a pivoting centerline interface, and the -S magnet enables direct sensor integration. Note that a standard cylinder drifts if air pressure is lost or the valve is centered; use an external rod lock or pilot-operated check valve if the load must be safely held in place.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI32X90STC FAQ
The JSI32X90STC delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push and 483 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa. It features a G1/8 air port and an M10x1.25 rod thread.
It is a JIS-standard profile cylinder that is shorter and more compact than an ISO 15552 cylinder of the same 32 mm bore, saving space without sacrificing the 90 mm stroke or adjustable cushioning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI32X90STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.