Airtac JSI Series Standard Cylinder JSI80X250TC
The AirTAC Airtac JSI Series Standard Cylinder JSI80X250TC is a genuine double acting JIS-standard air cylinder with a Ø80mm bore and 250mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke250 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI80X250TC
Delivering 2513 N of push force at 0.5 MPa, the AirTAC JSI80X250TC is a double-acting JIS-standard profile cylinder built for tight machinery. Its extruded hard-anodized aluminum barrel omits external rods, making the unit shorter and more compact than an ISO 15552 cylinder of the same 80 mm bore. The internal two-way piston seal retains grease for a long, low-friction service life.
Because this SKU lacks the -S magnet, it cannot accept CMSE or DMSE position sensors. Plan for roughly 1508 N of real work at 0.5 MPa, which translates to lifting about 128 kg vertically with a 2:1 safety margin. Air enters via G3/8 ports, and adjustable 29 mm air cushions at both ends decelerate the piston smoothly.
Airtac JSI Series Standard Cylinder JSI80X250TC Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI80X250TC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI80X250TC
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI80X250TC Is Used
Press Ejection
Provides the 2513 N push force needed to eject formed metal blanks from a 50-ton stamping press, using the 250 mm stroke to clear the die area completely.
Pallet Diversion
Uses the TC trunnion mount to pivot a heavy diverter arm on a packaging line, deflecting filled cartons weighing up to 128 kg onto a secondary spur belt.
Lift Gate Actuation
Raises and lowers a 100 kg loading dock gate through 250 mm of travel, relying on the hard-anodized barrel to withstand dusty, high-cycle warehouse environments.
Is the Airtac JSI Series Standard Cylinder JSI80X250TC the Right Cylinder?
When sizing this 80 mm bore against its neighbors, note the 63 mm option yields 1559 N push while the 100 mm step provides 3927 N at 0.5 MPa. The integrated TC trunnion mount suits pivoting articulations, but ensure your frame supports the side loads inherent to a 250 mm stroke by guiding the rod end to prevent bending. Since this is a non-magnetic SKU, switching to a JSI80X250TC-S variant is required if you need drop-in sensor tracking.
Remember that standard pneumatic operation will not secure a suspended load; if air pressure drops or the valve centers, the piston drifts. The end cushions only slow travel near the stroke limits and never act as a brake. To hold a vertical load safely, fit an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI80X250TC FAQ
This 80 mm bore cylinder features G3/8 ports and an M22x1.5 rod thread. It generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push and 3175 N pull at 0.7 MPa, with a theoretical maximum of 513 kgf at 1.0 MPa.
No, because this specific SKU does not include the -S magnet. To use CMSE or DMSE magnetic switches in the side sensor grooves, you must select the JSI80X250TC-S variant instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI80X250TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.