Airtac JSI Series Standard Cylinder JSI80X30
The AirTAC Airtac JSI Series Standard Cylinder JSI80X30 is a genuine double acting JIS-standard air cylinder with a Ø80mm bore and 30mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke30 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI80X30
Delivering 2513 N of push force at 0.5 MPa, the AirTAC JSI80X30 is a double-acting JIS-standard profile cylinder built for tight machinery layouts. Its extruded hard-anodized aluminum barrel omits external rods entirely, making the unit significantly shorter and more compact than a same-bore ISO 15552 cylinder without sacrificing structural rigidity.
Equipped with a G3/8 port and a 25 mm carbon steel rod, it handles speeds of 30-800 mm/s. Because this specific SKU lacks the -S magnet suffix, it cannot accept CMSE or DMSE position sensors. For real-world sizing, plan for about 1508 N of actual work at 0.5 MPa, which translates to lifting roughly 128 kg vertically with a 2:1 safety margin. The internal two-way piston seal retains grease to ensure long, low-friction service life.
Airtac JSI Series Standard Cylinder JSI80X30 Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI80X30 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI80X30
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI80X30 Is Used
Injection Mold Clamping
Provides high clamping force in a short stroke for securing small injection mold inserts within confined machine frames.
Heavy Pallet Stopper
Acts as a robust end-stop for heavy pallets on packaging lines, absorbing impact via its 29 mm adjustable air cushions.
Carton Press Flap
Folds and holds heavy cardboard carton flaps during automated taping operations where a brief 30 mm travel is required.
Is the Airtac JSI Series Standard Cylinder JSI80X30 the Right Cylinder?
If 2513 N of push at 0.5 MPa is excessive for your fixture, stepping down to the 63 mm bore yields 1559 N; conversely, upgrading to the 100 mm bore provides 3927 N for heavier payloads. This 80 mm bore uses an M22x1.5 rod thread and a 29 mm adjustable air cushion at both ends to soften end-of-stroke impact. Note that a standard cylinder drifts when air is lost or the valve is centered, as the cushion only decelerates the piston and acts as no lock. For suspended loads, integrate an external rod lock or a pilot-operated check valve. The short 30 mm stroke keeps the assembly highly rigid, minimizing rod-bending concerns.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI80X30 FAQ
The JSI80X30 delivers 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push and 3175 N pull at 0.7 MPa, with a theoretical maximum of 513 kgf at 1.0 MPa. The air port size is G3/8.
No, because this SKU lacks the -S magnet suffix, it cannot accept CMSE or DMSE magnetic switches. You must select the JSI80X30-S variant to utilize the side sensor grooves for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI80X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.