Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-75S
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X160-75S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-75S
Its extruded hard-anodized aluminum profile barrel skips external rods, making the total body shorter and more compact than a same-bore ISO 15552 cylinder. The G1/2 port handles the air flow for smooth 30-800 mm/s cycling.
The -75 code means an external stop screw lets you shorten the extend stroke on-site by up to 75 mm, giving a usable 85-160 mm range while the retract end stays fixed. This lets you fine-tune the end position without swapping the cylinder. The -S suffix adds a built-in piston magnet for CMSE/DMSE sensors in the side grooves.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-75S Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-75S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-75S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-75S Is Used
Press Fit Tuning
Dial in the exact 85-160 mm extend reach for seating bearings without remounting the entire actuator.
Variable Transfer Stops
Adjust the stop block position on the fly to handle different package lengths on a single line.
Pallet Positioning
Leverage the 200 kg vertical lift capacity to raise platforms, using the external screw to set precise height limits.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-75S the Right Cylinder?
The adjustable stroke is perfect for sharing one spare across multiple stroke variants or dialing in final end positions on-site. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. Because this SKU includes the -S magnet, you can fit CMSE/DMSE reed or electronic switches directly into the barrel grooves. For any stroke over 300 mm, always use a guide rail to prevent side-load wear on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-75S FAQ
At 0.5 MPa it pushes 3927 N and pulls 3574 N. At 0.7 MPa it pushes 5497 N and pulls 5003 N. The theoretical maximum is 801 kgf at 1.0 MPa. The air port is G1/2.
An external stop screw shortens the extend stroke by up to 75 mm on-site, giving a usable range of 85-160 mm. The nominal 160 mm is the maximum, and the retract end is fixed. This mechanism sets the end position but does not lock the load; use an external rod lock or pilot-operated check valve to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X160-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.