Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50
The AirTAC JSIJ100~125 Adjustable Cylinder JSIJ100X500-50 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø100mm bore and 500mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke500 mm
- Port sizeG1/2
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50
The hard-anodized aluminium extrusion contains no external tie rods, yielding a clean exterior, while the G1/2 port handles the air volume needed for dynamic movement. An external stop screw lets you trim the extend stroke on-site by up to 50 mm, giving a usable range of 450 to 500 mm without swapping the cylinder.
The retract end remains fixed, and the adjustable air cushions at both ends absorb kinetic energy over a 33 mm travel. Because this specific SKU lacks a magnet, it cannot accept CMSE or DMSE sensors; adding the -S variant enables position detection. Note that the cushion only decelerates the piston, so an external rod lock or pilot-operated check valve is required to hold a load securely against air loss.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50 Technical Specifications
| Model | Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | 4935 N |
| Max (@1.0 MPa) | 719 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50 Is Used
Press Stroke Tuning
Dial in the exact 450 to 500 mm extend position on a heavy stamping press without machining new hard stops.
Pallet Diverting
Adjust the extend reach on the fly to accommodate different pallet widths entering a high-force transfer line.
Heavy Lift Gates
Actuate large material handling gates where the 100 mm bore provides the necessary push force and the stroke can be trimmed to clear obstructions.
Is the Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50 the Right Cylinder?
The 50 mm adjustable window is ideal for sharing a single spare across multiple stroke variants or fine-tuning the end position during machine commissioning. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. Because the 500 mm stroke creates a long lever arm, always use an external guide rail to prevent rod bending and side-load damage. This non-magnetic version cannot support sensors, so choose the -S variant if your control system requires CMSE or DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50 FAQ
The theoretical maximum force is 801 kgf at 1.0 MPa. It features a G1/2 port and a 32 mm piston rod.
The nominal 500 mm stroke is the maximum. An external adjuster screw lets you shorten the extend stroke on-site by up to 50 mm, yielding a usable range of 450 to 500 mm. The retract end is fixed, and this mechanism only sets the end position, it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ100~125 Adjustable Cylinder JSIJ100X500-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.